Laurent Pinchart wrote:
> Hi Urs,
>
> On Wednesday 05 December 2007, Beyerle Urs wrote:
>> Hi,
>>
>> I can not get a Fujitsu Webcam 046d:09b2 working with the uvcvideo driver
>> (SVN revision 148). The driver loads perfectly but no signal at
>> /dev/video0.
>>
>> My System:
>> - FJS Laptop Lifebook S6410
>> - Scientific Linux 51 (RHEL5.1) with kernel 2.6.18-53.el5
>>
>> # lsusb
>> ...
>> Bus 006 Device 003: ID 046d:09b2 Logitech, Inc.
>> ...
>>
>> # less /var/log/messages
>> ...
>> Dec 5 16:04:59 s6410 kernel: uvcvideo: Found UVC 1.00 device OEM Camera
>> (046d:09b2) Dec 5 16:04:59 s6410 kernel: usbcore: registered new driver
>> uvcvideo Dec 5 16:04:59 s6410 kernel: USB Video Class driver (v0.1.0)
>>
>> and /dev/video and /dev/video is created by udev
>>
>> # ll /dev/video
>> lrwxrwxrwx 1 root root 6 Dec 5 16:04 /dev/video -> video0
>> [EMAIL PROTECTED] ~]# ll /dev/video0
>> crw------- 1 root root 81, 0 Dec 5 16:04 /dev/video0
>>
>> However
>> # cat /dev/video0
>> cat: /dev/video0: No such device
>
> That's pretty normal, the driver doesn't support the read() interface. Try
> using applications such as luvcview, ucview or ekiga, they should work fine.
>
Thanks for the answer. Yes, it's working with luvcview and ekiga!
Hope vlc soon supports v4l2...
Thanks again,
Urs
> Best regards,
>
> Laurent Pinchart
_______________________________________________
Linux-uvc-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
