Hi As asked in this page (http://linux-uvc.berlios.de/), I report that my webcam Philips SPC 1000NC works (almost) with the uvcvideo module.
I compiled the revision 158 from SVN, using the following kernel : [EMAIL PROTECTED] luvcview-20070512]$ uname -a Linux jice.is-a-geek.org 2.6.17-14mdvcustom #1 SMP Tue Dec 25 20:47:45 CET 2007 i686 AMD Athlon(tm) XP 1800+ GNU/Linux I managed to have the picture in luvcview, but I must run the same command line a few times before it works. Below, the first command line did not work, the second yes. If you need more information, I'd like to help you to better support this webcam. [EMAIL PROTECTED] luvcview-20070512]$ ./luvcview -d /dev/video1 -s 640x480 luvcview version 0.2.1 size width: 640 height: 480 Video driver: x11 A window manager is available video /dev/video1 Unable to dequeue buffer (5). Error grabbing Clean Up done Quit [EMAIL PROTECTED] luvcview-20070512]$ ./luvcview -d /dev/video1 -s 640x480 luvcview version 0.2.1 size width: 640 height: 480 Video driver: x11 A window manager is available video /dev/video1 Stop asked Clean Up done Quit [EMAIL PROTECTED] luvcview-20070512]$ By the way, thanks for this driver :-) I also managed to have the webcam display something in the AMSN wizard once, but the subsequent tries failed (AMSN saying that it cannot grab). Also, the device is changing from /dev/video1 to /dev/video2 and back to /dev/video1, and dmesg displays: usbcore: deregistering driver uvcvideo uvcvideo: Found UVC 1.00 device Philips SPC 1000NC Webcam (0471:0332) usbcore: registered new driver uvcvideo USB Video Class driver (v0.1.0) usb 3-1: USB disconnect, address 3 usb 3-1: new high speed USB device using ehci_hcd and address 4 usb 3-1: configuration #1 chosen from 1 choice uvcvideo: Found UVC 1.00 device Philips SPC 1000NC Webcam (0471:0332) 4:3:1: cannot get freq at ep 0x84 usb 3-1: USB disconnect, address 4 usb 3-1: new high speed USB device using ehci_hcd and address 5 usb 3-1: configuration #1 chosen from 1 choice uvcvideo: Found UVC 1.00 device Philips SPC 1000NC Webcam (0471:0332) 5:3:1: cannot get freq at ep 0x84 usb 3-1: USB disconnect, address 5 usb 3-1: new high speed USB device using ehci_hcd and address 6 usb 3-1: configuration #1 chosen from 1 choice (of course I never unpluged the usb cable) please contact me if I can help. bye -- Jean-Christophe Cardot - [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
