Hello Laureant, Thanks for the quick reaction. (Although I had to read it off the web archives: your ISP is being blocked at our site.)
I have produced some logs when passing "trace=0xff" to the module on the command line. It's got very long, and I don't know what may be interesting and what not. Therefore instead of attaching it the e-mail I've made it available at http://optics.szfki.kfki.hu/~gabrisa/outgoing/syslog-04f2:b021 The logs were recorded when I was using luvcvideo and trying to use amsn. Amsn was runnig in the interval: 14:45:27 -> 14:45:46 ending up with these errors: ioctl: VIDIOC_S_CTRL(id=9963776;value=25536): Input/output error ioctl: VIDIOC_S_CTRL(id=9963777;value=32768): Input/output error Not a JPEG file: starts with 0x3a 0xd7 Oops: malloc_video_bufs is 1 (expected 0) [utils/linux/capture/libng/grab-ng.c:malloc_bufs_check:235] Oops: processes is 1 (expected 0) [utils/linux/capture/libng/convert.c:process_check:179] Luvcvideo was running within 3 intervals: 14:44:47 -> 14:44:51, 14:46:05 -> 14:46:08, and for a while in the begining but I forgot to document it I was getting the error: "hmm FW error,not seq DCT ??" for apparently every frame. Further, the output JPEGS have "Invalid SOS parameters for sequential JPEG" I tried to remove all other messages from the syslog, however, I had the old webcam plugged in, and that generated some v4l messages also. One more thing that just came into my mind: I have disabled the ehci module in the kernel as it was causing problems with the old webcam. I hope you can figure out what is the problem here... Aurel --------------------------------------------------------- Web: http://www.szfki.hu/~gabrisa E-mail: [EMAIL PROTECTED] Mobile: +36 (20) 240-50-15 Office: +36 (1) 39-22222/1229 "Ha ezt el tudja olvasni, minden bizonnyal tud magyarul." --------------------------------------------------------- _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
