Hi Philip: thanks for the help... I allready try with echo 1 > /proc/acpi/asus/camera becouse i see that on the ucview launching script...and with that the video0 device appear but don't work with vlc, uvc-streaming or ffmpeg... I check in BIOS and the camera was disable, so I enable the camera and the video0 device exist when the system start, but no of the programs work...
The uvc-viewer say to me that can't set the MJPEG format for the video0 device...can i change the format? any ideas? in advance, thank you very much.. Mauricio Philip Heron wrote: > Mauricio Henriquez wrote: >> Hi Guys: >> >> My name is Mauricio and this is my first post to the list, so hi to >> all.. >> Recently i buy a new Eee PC (Asus sub-notebook) that have a UVC >> webcam integrated (Eee PC have a Xandros linux distro), the camera >> work perfect with the included UCView program, but i have problems >> when i try to streaming from the webcam with the uvc-straming (or >> mjpeg-streaming), or ffmpeg, becouse the /dev/video0 device is >> created dinamically, I mean when the camera is not used, the video0 >> device don't exist and only exist when the ucview program is running, >> so uvc-streaming or ffmpeg claim me about that the device don't >> exist...also i check the kernel modules and in all time the uvcvideo >> module is loaded (also the v4l2, videodev and other related..) >> Also i try to manually make the device with mknod video0...., but >> don't work.. > > Hi Mauricio, > > Make sure the camera is enabled in the BIOS, and try running this as > root: > > echo 1 > /proc/acpi/asus/camera > > -Phil > _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
