Dear Users, i just compiled the latest source from the trunk repository and load the modules. here is what i got:
uvcvideo: Found UVC 1.00 device CNF7070 (04f2:b107) usbcore: registered new interface driver uvcvideo lsusb gets me: Bus 001 Device 002: ID 04f2:b107 Chicony Electronics Co., Ltd Its the integrated camera on my brand new hp 2133 subnotebook. the output from above looks good so i tried to access the device /dev/video with the following mplayer stanza: mplayer tv:// ndevice=/dev/video Unfortunatelly i only got a green sreen, output of mplayer below: [EMAIL PROTECTED]:~$ mplayer tv:// device=/dev/video0 -vo x11 MPlayer 1.0rc1-4.1.2-DFSG-free (C) 2000-2006 MPlayer Team CPU: VIA C7-M Processor 1200MHz (Family: 6, Model: 13, Stepping: 0) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: dummy name: NULL-TV author: alex Selected input hasn't got a tuner! open: No such file or directory [MGA] Couldn't open: /dev/mga_vid open: No such file or directory [MGA] Couldn't open: /dev/mga_vid [VO_TDFXFB] This driver only supports the 3Dfx Banshee, Voodoo3 and Voodoo 5. [VO_3DFX] Unable to open /dev/3dfx. It seems there is no Xvideo support for your video card available. Run 'xvinfo' to verify its Xv support and read DOCS/HTML/en/video.html#xv! See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video VDec: vo config request - 320 x 200 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO: [x11] 320x200 => 320x200 Planar YV12 SwScaler: using unscaled yuv420p -> rgb32 special converter Selected video codec: [rawyv12] vfm: raw (RAW YV12) ========================================================================== Starting playback... after that i only get a green screen - any ideas? any help is greatly appreciated regards stefan _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
