The big problem is that the datasheet is just about the sensor-chip. This chip is embedded in a D-Max board!! But D-Max doesn't gives information aobut the firmware or how to configure the webcam chip: http://www.d-max.com.tw/VGA_UVC%201.html
So..I thinik my purpose is quite impossible!! Any suggestion? 2008/7/12 Marco Argiolas <[EMAIL PROTECTED]>: > Hi all, > just few weeks ago I made a patch for the uvcvideo driver in order to flip > webcam images. > I thought it wasn't possible to ask the webcam to flip the image by > itself!! > > But now, surfing on internet I found this: > > http://serialize.blogspot.com/2008/02/asus-g1s-a1-13m-pixel-webcam-adventure.html > > I have the same webcam described in that post: > 174f:5a35 , Sonix Technology Co., Ltd. , USB 2.0 Camera > > So now I know my webcam can flip the image just changing one bit in a > register: > 1E MVFP 00 RW Mirror / Vertical Flip Enable > Bit[7:6] Reserved > Bit[5] Mirror > 0: Normal Image > 1: Mirror Image > Bit[4] Vertical Flip > 0: Vertical Flip Disable > 1: Vertical Flip Enable > Bit[3:0] Reserved > > You can download > here<http://rapidshare.com/files/94672360/OV9655-datasheet.pdf.html>the > datasheet of my webcam chip: > http://rapidshare.com/files/94672360/OV9655-datasheet.pdf.html > > Do someone have any ideas on how to change the 4th bit of the register at > the address 1E? > In the datasheet there is also written that: "The device slave addresses > are 60 for write and 61 for read." > > Any suggestion will be surely useful!!! > Thank you very much!! > > Marco Argiolas > -- Marco Argiolas [EMAIL PROTECTED] [EMAIL PROTECTED] skype: arjos85 msn: [EMAIL PROTECTED]
_______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
