The device is is a  WIFI USB 2.0 device, it use the same USB slot, so I
think the USB controller could work fine now. The error message as fllowing
:

usb 1-1.4: device descriptor read/64, error 2
usb 1-1.4: new full speed USB device using musb_hdrc and address 5
usb 1-1.4: device descriptor read/8, error 2
usb 1-1.4: device descriptor read/8, error 2
usb 1-1.4: new full speed USB device using musb_hdrc and address 6
usb 1-1.4: device descriptor read/8, error 2
usb 1-1.4: device descriptor read/8, error 2

     I think the USB controller  couldn't find the right dirver, so it
display these error message.

 --
Best Regards

2009/12/22 Brian Pin <shaohu...@gmail.com>

> In my previous reply, I saw the error is not related to UVC driver.
> Also you have tested another USB device (is it an UVC device? you have to
> be specific)
> If this device you tested is UVC device, then your UVC driver is working
> fine.
>
>
> 2009/12/21 Yanbin Yue <yybingyyb...@gmail.com>
>
> HI,
>>
>>      I have tested another USB device, its driver very simple, so it can
>> work now. I guess, maybe I lost some config in the kernel configure, could
>> you show me the must configure items whom if I chose then the UVC could
>> work.
>>      The attachment is my kernel configure file.
>>
>>      Thanks.
>>
>> --
>> Best Regards
>>
>> 2009/12/19 Brian Pin <shaohu...@gmail.com>
>>
>>> In this case I think you can't blame UVC, because it is shown your USB
>>> host controller can not get descriptor successfully, let alone to let UVC
>>> driver bind the device. So I think you should first check the device. See if
>>> its working anywhere. Or check the roothub of the port, maybe it has
>>> something wrong on it.
>>> In anycase, it has nothing to do with UVC module because the host
>>> controller driver doesn't even have a chance to bring up the UVC driver.
>>>
>>>
>>>
>>> 2009/12/18 蔚艳斌 <yybingyyb...@gmail.com>
>>>
>>> Hi,
>>>>   After I configed USB_VIDEO_CLASS,  when I plug the UVC Device to the
>>>> board, and "dmesg",  there will be some error message as fllowing:
>>>>
>>>> usb 1-1.4: device descriptor read/64, error 2
>>>> usb 1-1.4: new full speed USB device using musb_hdrc and address 5
>>>> usb 1-1.4: device descriptor read/64, error 2
>>>> usb 1-1.4: device descriptor read/64, error 2
>>>> usb 1-1.4: new full speed USB device using musb_hdrc and address 6
>>>> usb 1-1.4: device descriptor read/8, error 2
>>>> usb 1-1.4: device descriptor read/8, error 2
>>>> usb 1-1.4: new full speed USB device using musb_hdrc and address 7
>>>> usb 1-1.4: device descriptor read/8, error 2
>>>> usb 1-1.4: device descriptor read/8, error 2
>>>>
>>>> and lsmod
>>>>
>>>> Module                  Size  Used by
>>>> ipv6                  235192  12
>>>>
>>>> I guess that the dirver hadn't insmod, so entry the UVC directory and
>>>> "modprobe uvcvideo"
>>>>
>>>> Module                  Size  Used by
>>>> uvcvideo               54152  0
>>>> compat_ioctl32          1216  1 uvcvideo
>>>> videodev               31648  1 uvcvideo
>>>> v4l1_compat            14500  2 uvcvideo,videodev
>>>> ipv6                  235192  12
>>>>
>>>> Then plug the UVC Device again, dmesg , nothing about UVC append.
>>>>
>>>> lsusb, I can't find the DeviceId and VenderId about my UVC device. Is
>>>> there anything wrong ?
>>>>
>>>> --
>>>> Best Regards
>>>>
>>>> 2009/12/19 Brian Pin <shaohu...@gmail.com>
>>>>
>>>>> Hi
>>>>> 2.6.28 already contains uvc host driver implementation.
>>>>> You just need to find out 'USB_VIDEO_CLASS' during config. then you
>>>>> will have the uvc driver support
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Dec 18, 2009 at 5:33 PM, 蔚艳斌 <yybingyyb...@gmail.com> wrote:
>>>>>
>>>>>> Hello everyone,
>>>>>>
>>>>>>         My uvc devic ID is 0c45:62c0 . I can use it in my VM which os
>>>>>> is ubuntu 8.04. We want to use it in the OMAP3530-MINI board.
>>>>>> I don't know how complier the UVC source in my VM and then it can be
>>>>>> used in the OMAP3530-MINI. By the way, the kernel version is
>>>>>> 2.6.24-26-generic in my VM and it in the OMAP3530-MINI is 2.6.28.
>>>>>>
>>>>>>         Could someone help me?
>>>>>>         Sorry for my pool English.
>>>>>>
>>>>>> Best wishes.
>>>>>> _______________________________________________
>>>>>> Linux-uvc-devel mailing list
>>>>>> Linux-uvc-devel@lists.berlios.de
>>>>>> https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Best Regards
>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>> Best Regards
>>>
>>>
>>
>
>
> --
> Best Regards
>
>
_______________________________________________
Linux-uvc-devel mailing list
Linux-uvc-devel@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel

Reply via email to