Hi Neil, On Thursday 18 November 2010 16:00:00 Paulo Assis wrote: > Neil Hi, > > Could you please post the relevant dmesg output. > Increasing uvcvideo verbosity would also be a good help. > > > --- snip --- > > > libv4lconvert: warning more framesizes then I can handle! > > libv4lconvert: warning more framesizes then I can handle! > > --- snip --- > > No problem with this, libv4l only handles a limit number of > resolutions when enumerating video formats (apparently the limit is > rather low for the current uvc camera models).
Just out of curiosity, do you get the same warning when the camera is plugged into a USB 2.0 port ? > > libv4l2: error turning on stream: Invalid argument > > Unable to start capture: Invalid argument > > This seems to be the problem, but you need to check dmesg for the > cause of the invalid argument error. > Most likely this is related to the usb core and not to the driver > itself, but it's hard to say without more info. Could you please increase the driver verbosity (65535 is fine) and post the messages printed to the kernel log by the driver when you try to run luvcview ? -- Regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
