[  515.220000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
[  515.220000] str8100-ehci str8100-ehci: GetStatus port 2 status
001009 POWER sig=se0 PEC CONNECT
[  515.220000] hub 1-0:1.0: port 2 enable change, status 00000501
[  515.220000] hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[  515.220000] hub 1-0:1.0: port 2, status 0501, change 0002, 480 Mb/s
[  515.220000] usb 1-2: USB disconnect, address 2
[  515.220000] usb 1-2: unregistering device
[  515.220000] usb 1-2: usb_disable_device nuking all URBs
[  515.220000] str8100-ehci str8100-ehci: shutdown urb c3fbe000 ep1in-iso
[  515.220000] str8100-ehci str8100-ehci: shutdown urb c3c4d000 ep1in-iso
[  515.220000] str8100-ehci str8100-ehci: shutdown urb c3fbf800 ep1in-iso
[  515.220000] str8100-ehci str8100-ehci: shutdown urb c3fbf000 ep1in-iso
[  515.220000] str8100-ehci str8100-ehci: shutdown urb c3fbe800 ep1in-iso
[  515.260000] usb 1-2: unlink qh16-0001/ffc02100 start 15 [1/0 us]
[  515.260000] str8100-ehci str8100-ehci: shutdown urb c3c5b540 ep3in-intr
[  515.260000] usb 1-2: unregistering interface 1-2:1.0
[  515.270000] usb 1-2:1.0: uevent
[  515.270000] usb 1-2: unregistering interface 1-2:1.1
[  515.270000] usb 1-2:1.1: uevent
[  515.280000] usb 1-2: unregistering interface 1-2:1.2
[  515.280000] usb 1-2:1.2: uevent
[  515.280000] usb 1-2: unregistering interface 1-2:1.3
[  515.280000] usb 1-2:1.3: uevent
[  515.280000] usb 1-2: uevent
[  515.340000] str8100-ehci str8100-ehci: GetStatus port 2 status
001002 POWER sig=se0 CSC
[  515.340000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004


On Wed, Feb 16, 2011 at 6:07 AM, Laurent Pinchart
<laurent.pinch...@ideasonboard.com> wrote:
> Hi,
>
> On Wednesday 02 February 2011 01:07:41 linux newbie wrote:
>> I developed one application that keeps on reading one frame of data
>> from camera. If I connect MS Lifecam, I am getting USB disconnect
>> event randomly. But this is not happening in Logitech versions of
>> Camera.
>>
>> Has anyone came across this sort of issue? Is there any solution worth
>> trying it?
>
> Kernel log ?
>
> --
> Regards,
>
> Laurent Pinchart
>
_______________________________________________
Linux-uvc-devel mailing list
Linux-uvc-devel@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel

Reply via email to