Hi Alexandre, On Wednesday 23 March 2011 15:43:11 Alexandre Felipe Muller de Souza wrote: > Hello, I experienced some problems with Acer BisonCam builtin on > Notebook. I tried to update packages to most updated (kernel, uvcdriver) > but the problem occurs at the same way. When I use ucview application, > sometimes it crashed when I try to initialize the cam. I found the > device information as fully compatible at device list, but the name is > different. When the problem occurs I have to remove and add again the > module to work again. > At terminal the application writes: > > error: input/output error > error: input/output error > error: input/output error > Aborted > > The demsg output: > uvcvideo: Failed to query (135) UVC control 3 (unit 5) : -110 (exp. 2). > uvcvideo: Failed to query (135) UVC control 2 (unit 5) : -110 (exp. 2). > uvcvideo: Failed to query (135) UVC control 2 (unit 5) : -110 (exp. 2). > uvcvideo: Failed to query (135) UVC control 3 (unit 5) : -110 (exp. 2). > uvcvideo: Failed to query (135) UVC control 7 (unit 5) : -110 (exp. 2).
Your camera times out when it receives those valid requests. This is probably caused by a camera firmware bug, leading to a camera crash. There's little that can be done on the host side. I'll mark the camera as potentially buggy in the list of supported devices. -- Regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
