Hi Josef, Thanks for the report.
On Monday 31 October 2011 12:22:35 Josef Burg wrote: > Hi Alexey, > > I tested all the modes you reported and came up with te following table: > | Dell | Logilink > > -------------------------------+-------------------------- > without quirks | working | not working > UVC_QUIRK_STATUS_INTERVAL | working | not working > UVC_QUIRK_PROBE_MINMAX | working *1 | working > UVC_QUIRK_PROBE_EXTRAFIELDS | not working | not working > UVC_QUIRK_BUILTIN_ISIGHT | not working | not working > UVC_QUIRK_STREAM_NO_FID | not working | not working > UVC_QUIRK_IGNORE_SELECTOR_UNIT | working | not working > UVC_QUIRK_FIX_BANDWIDTH | working | not working > UVC_QUIRK_PROBE_DEF | working | not working > UVC_QUIRK_RESTRICT_FRAME_RATE | working | not working > > *1 the image looks very pixelated > > > So sorry for the report for the Dell webcam. I had quirks enabled by > default for my Logilink-Webcam and didn't test it without quirks :-/ > > But the Logilink USB-Webcam is only working with quirks set to 0x2 > (UVC_QUIRK_PROBE_MINMAX). Otherwise I get 'Unable to set format: > Input/output error\n Init v4L2 failed !! exit fatal' when starting > luvcview. I've added the quirk to the driver and updated the supported devices list. I will push the changes to v3.3. -- Regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
