On 01/24/2015 08:45 AM, Rafał Miłecki wrote:
On 24 January 2015 at 17:32, Guenter Roeck <[email protected]> wrote:
On 01/24/2015 05:47 AM, Rafał Miłecki wrote:
Just like in case of other watchdog drivers, use the new kernel core
API to provide restart support.
Signed-off-by: Rafał Miłecki <[email protected]>
---
drivers/watchdog/bcm47xx_wdt.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/bcm47xx_wdt.c
b/drivers/watchdog/bcm47xx_wdt.c
index 9816485..dac3c5d 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -169,6 +169,17 @@ static int bcm47xx_wdt_notify_sys(struct
notifier_block *this,
return NOTIFY_DONE;
}
+static int bcm47xx_wdt_restart(struct notifier_block *this, unsigned long
mode,
+ void *cmd)
+{
+ struct bcm47xx_wdt *wdt;
+
+ wdt = container_of(this, struct bcm47xx_wdt, restart_handler);
+ wdt->timer_set(wdt, 1);
+
+ return NOTIFY_DONE;
+}
+
static struct watchdog_ops bcm47xx_wdt_soft_ops = {
.owner = THIS_MODULE,
.start = bcm47xx_wdt_soft_start,
@@ -204,20 +215,27 @@ static int bcm47xx_wdt_probe(struct platform_device
*pdev)
watchdog_set_nowayout(&wdt->wdd, nowayout);
wdt->notifier.notifier_call = &bcm47xx_wdt_notify_sys;
-
ret = register_reboot_notifier(&wdt->notifier);
if (ret)
goto err_timer;
- ret = watchdog_register_device(&wdt->wdd);
+ wdt->restart_handler.notifier_call = &bcm47xx_wdt_restart;
+ wdt->restart_handler.priority = 128;
This should be low priority since it doesn't immediately restart the system
but uses a watchdog timeout.
I think this is also the only way to reboot Broadcom device. Is there
some howto on values I should use? Should I change it to sth like 64?
Or what number?
64 is fine.
You never know if someone using that chip implements, for example, reset
with a gpio pin.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
