> On Feb 18, 2015, at 8:57 PM, Timo Kokkonen <[email protected]> wrote:
> 
> By default the driver will start a kernel timer which keeps on kicking
> the watchdog HW until user space has opened the watchdog
> device. Usually this is desirable as the watchdog HW is running by
> default and the user space may not have any watchdog daemon running at
> all.
> 
> However, on production systems it may be mandatory that also early
> crashes and lockups will lead to a watchdog reset, even if they happen
> before the user space has opened the watchdog device.
> 
> To resolve the issue, add a new device tree property
> "early-timeout-sec" which will let the kernel timer to ping the
> watchdog HW only as long as the specified timeout permits. The default
> is still to use kernel timer, but more strict behavior can be enabled
> via the device tree property.
> 
> Signed-off-by: Timo Kokkonen <[email protected]>
> ---
> Documentation/devicetree/bindings/watchdog/watchdog.txt | 7 +++++++
> drivers/watchdog/at91sam9_wdt.c                         | 9 ++++++++-

This should not be handled by the driver but the kernel in a generic way

Best Regards,
J.
> 2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.txt 
> b/Documentation/devicetree/bindings/watchdog/watchdog.txt
> index 7e3686c..32647cf 100644
> --- a/Documentation/devicetree/bindings/watchdog/watchdog.txt
> +++ b/Documentation/devicetree/bindings/watchdog/watchdog.txt
> @@ -4,9 +4,16 @@ using these definitions.
> 
> Optional properties:
> - timeout-sec: Contains the watchdog timeout in seconds.
> +- early-timeout-sec: If present, specifies a timeout value in seconds
> +  that the driver keeps on ticking the watchdog HW on behalf of user
> +  space. Once this timeout expires watchdog is left to expire in
> +  timeout-sec seconds. If this propery is set to zero, watchdog is
> +  started (or left running) so that a reset occurs in timeout-sec
> +  since the watchdog was started.
> 
> Example:
> 
> watchdog {
>        timeout-sec = <60>;
> +      early-timeout-sec = <120>;
> };
> diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
> index 6df9405..1b40bfa 100644
> --- a/drivers/watchdog/at91sam9_wdt.c
> +++ b/drivers/watchdog/at91sam9_wdt.c
> @@ -89,6 +89,8 @@ struct at91wdt {
>       u32 mr_mask;
>       unsigned long heartbeat;        /* WDT heartbeat in jiffies */
>       bool nowayout;
> +     /* Timeout in jiffies for stopping the early timer */
> +     unsigned long early_timer;
>       unsigned int irq;
> };
> 
> @@ -122,7 +124,8 @@ static void at91_ping(unsigned long data)
> {
>       struct at91wdt *wdt = (struct at91wdt *)data;
>       if (time_before(jiffies, wdt->next_heartbeat) ||
> -         !watchdog_active(&wdt->wdd)) {
> +             (time_before(jiffies, wdt->early_timer) &&
> +                     !watchdog_active(&wdt->wdd))) {
>               at91_wdt_reset(wdt);
>               mod_timer(&wdt->timer, jiffies + wdt->heartbeat);
>       } else {
> @@ -316,6 +319,10 @@ static int of_at91wdt_init(struct device_node *np, 
> struct at91wdt *wdt)
> 
>       wdt->mr |= max | ((max - min) << 16);
> 
> +     if (!of_property_read_u32_index(np, "early-timeout-sec", 0,
> +                                     (u32 *)&wdt->early_timer))
> +             wdt->early_timer = wdt->early_timer * HZ + jiffies;
> +
>       return 0;
> }
> #else
> -- 
> 2.1.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to