Hi Mans,
On Thu, Nov 19, 2015 at 05:54:27PM +0000, Mans Rullgard wrote:
> This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
> watchdog.
>
> Signed-off-by: Mans Rullgard <[email protected]>
> ---
> Changes:
> - deactivate initially if disable bit is set so as to avoid accidentally
> resetting if the counter is expired
> ---
> drivers/watchdog/Kconfig | 10 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/tangox_wdt.c | 222
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 233 insertions(+)
> create mode 100644 drivers/watchdog/tangox_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7a8a6c6..f43ff7a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -135,6 +135,16 @@ config MENF21BMC_WATCHDOG
> This driver can also be built as a module. If so the module
> will be called menf21bmc_wdt.
>
> +config TANGOX_WATCHDOG
> + tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
> + select WATCHDOG_CORE
> + depends on ARCH_TANGOX || COMPILE_TEST
> + help
> + Support for the watchdog in Sigma Designs SMP86xx (tango3)
> + and SMP87xx (tango4) family chips.
> +
> + This driver can be built as a module. The module name is tangox_wdt.
> +
> config WM831X_WATCHDOG
> tristate "WM831x watchdog"
> depends on MFD_WM831X
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 53d4827..46cb387 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -187,6 +187,7 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
> obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
> obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
> +obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c
> new file mode 100644
> index 0000000..083d0f3
> --- /dev/null
> +++ b/drivers/watchdog/tangox_wdt.c
> @@ -0,0 +1,222 @@
> +/*
> + * Copyright (C) 2015 Mans Rullgard <[email protected]>
> + * SMP86xx/SMP87xx Watchdog driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
#include <linux/bitops.h>
Did that get lost, or did you not add it on purpose ?
Code should always include the header files it needs. You can not rely on other
header files doing that for you. Those other header files may change.
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/watchdog.h>
> +
> +#define DEFAULT_TIMEOUT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static unsigned int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout");
> +
> +/*
> + * Counter counts down from programmed value. Reset asserts when
> + * the counter reaches 1.
> + */
> +#define WD_COUNTER 0
> +
> +#define WD_CONFIG 4
> +#define WD_CONFIG_XTAL_IN BIT(0)
> +#define WD_CONFIG_DISABLE BIT(31)
> +
> +struct tangox_wdt_device {
> + struct watchdog_device wdt;
> + void __iomem *base;
> + unsigned long clk_rate;
> + struct clk *clk;
> + struct notifier_block restart;
> +};
> +
> +static int tangox_wdt_set_timeout(struct watchdog_device *wdt,
> + unsigned int new_timeout)
> +{
> + wdt->timeout = new_timeout;
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_start(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 ticks;
> +
> + ticks = 1 + wdt->timeout * dev->clk_rate;
> + writel(ticks, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_stop(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> +
> + writel(0, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 count;
> +
> + count = readl(dev->base + WD_COUNTER);
> +
> + if (!count)
> + return 0;
> +
> + return (count - 1) / dev->clk_rate;
> +}
> +
> +static const struct watchdog_info tangox_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "tangox watchdog",
> +};
> +
> +static const struct watchdog_ops tangox_wdt_ops = {
> + .start = tangox_wdt_start,
> + .stop = tangox_wdt_stop,
> + .set_timeout = tangox_wdt_set_timeout,
> + .get_timeleft = tangox_wdt_get_timeleft,
> +};
> +
> +static int tangox_wdt_restart(struct notifier_block *nb, unsigned long
> action,
> + void *data)
> +{
> + struct tangox_wdt_device *dev =
> + container_of(nb, struct tangox_wdt_device, restart);
> +
> + writel(1, dev->base + WD_COUNTER);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int tangox_wdt_probe(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev;
> + struct resource *res;
> + u32 config;
> + int err;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dev->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + dev->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> +
> + err = clk_prepare_enable(dev->clk);
> + if (err)
> + return err;
> +
> + dev->clk_rate = clk_get_rate(dev->clk);
> +
> + dev->wdt.parent = &pdev->dev;
> + dev->wdt.info = &tangox_wdt_info;
> + dev->wdt.ops = &tangox_wdt_ops;
> + dev->wdt.timeout = DEFAULT_TIMEOUT;
> + dev->wdt.min_timeout = 1;
> + dev->wdt.max_timeout = (U32_MAX - 1) / dev->clk_rate;
> +
> + watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
> + watchdog_set_nowayout(&dev->wdt, nowayout);
> + watchdog_set_drvdata(&dev->wdt, dev);
> +
> + /*
> + * Deactivate counter if disable bit is set to avoid
> + * accidental reset.
> + */
> + config = readl(dev->base + WD_CONFIG);
> + if (config & WD_CONFIG_DISABLE)
> + writel(0, dev->base + WD_COUNTER);
> +
> + writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG);
> +
> + /*
> + * Mark as active and restart with configured timeout if
> + * already running.
> + */
> + if (readl(dev->base + WD_COUNTER)) {
> + set_bit(WDOG_ACTIVE, &dev->wdt.status);
> + tangox_wdt_start(&dev->wdt);
> + }
> +
> + err = watchdog_register_device(&dev->wdt);
> + if (err)
> + return err;
Why no clk_disable_unprepare() in the error case ?
If you think that is not needed, please explain.
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
