On Wed, Nov 25, 2015 at 12:03:34PM +0000, Martyn Welch wrote: > This patchs adds documentation for the binding of the Zodiac RAVE > Switch Watchdog Processor. This is an i2c based watchdog. > > Cc: Rob Herring <[email protected]> > Cc: Pawel Moll <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: Ian Campbell <[email protected]> > Cc: Kumar Gala <[email protected]> > Cc: [email protected] > Signed-off-by: Martyn Welch <[email protected]> > --- > > v2: Addition of optional properties. > v3: Correct naming of reset-duration-msec -> reset-duration-ms
I acked v2, so please add it. Acked-by: Rob Herring <[email protected]> > > .../devicetree/bindings/watchdog/ziirave-wdt.txt | 19 > +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > > diff --git a/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > new file mode 100644 > index 0000000..3d87818 > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > @@ -0,0 +1,19 @@ > +Zodiac RAVE Watchdog Timer > + > +Required properties: > +- compatible: must be "zii,rave-wdt" > +- reg: i2c slave address of device, usually 0x38 > + > +Optional Properties: > +- timeout-sec: Watchdog timeout value in seconds. > +- reset-duration-ms: Duration of the pulse generated when the watchdog times > + out. Value in milliseconds. > + > +Example: > + > + watchdog@38 { > + compatible = "zii,rave-wdt"; > + reg = <0x38>; > + timeout-sec = <30>; > + reset-duration-ms = <30>; > + }; > -- > 2.1.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
