From: Amitkumar Karwar <[email protected]> When aggregation port limit is reached, we stop aggregation and the data is sent to firmware. It is observed that one less packet than the port limit is aggregated in this case. ex. 15 instead of 16. The reason is we have redundant port limit checks before current packet is added to aggregation buffer.
The issue is fixed by removing these checks. We already have necessary check in precopy current buffer handling. Signed-off-by: Amitkumar Karwar <[email protected]> Signed-off-by: Avinash Patil <[email protected]> Signed-off-by: Bing Zhao <[email protected]> --- drivers/net/wireless/mwifiex/sdio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 1770fa3..993841e 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -1527,8 +1527,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter, __func__); if (MP_TX_AGGR_IN_PROGRESS(card)) { - if (!mp_tx_aggr_port_limit_reached(card) && - MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) { + if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) { f_precopy_cur_buf = 1; if (!(card->mp_wr_bitmap & @@ -1540,8 +1539,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter, /* No room in Aggr buf, send it */ f_send_aggr_buf = 1; - if (mp_tx_aggr_port_limit_reached(card) || - !(card->mp_wr_bitmap & + if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port))) f_send_cur_buf = 1; else -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
