On 2014-09-19 09:30, Sujith Manoharan wrote:
> From: Sujith Manoharan <[email protected]>
> 
> When multiple channel contexts are enabled, a p2p interface
> that is assigned to a context will have an address that
> is different from the device mac address, which is used
> by wpa_s as the p2p device ID.
> 
> Certain frames like provision requests use the device address
> and these get dropped since ath9k_calculate_summary_state()
> iterates over only the active interfaces in a context and the
> device address is not used.
> 
> Fix this by adding the device mac address to the bssid mask.
> 
> Signed-off-by: Sujith Manoharan <[email protected]>
> ---
>  drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
>  drivers/net/wireless/ath/ath9k/main.c  | 36 
> ++++++++++++++++++++++++++++++++++
>  2 files changed, 37 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/main.c 
> b/drivers/net/wireless/ath/ath9k/main.c
> index 78fc539..32f9db9 100644
> --- a/drivers/net/wireless/ath/ath9k/main.c
> +++ b/drivers/net/wireless/ath/ath9k/main.c
> @@ -940,6 +940,34 @@ static void ath9k_vif_iter(struct ath9k_vif_iter_data 
> *iter_data,
>       }
>  }
>  
> +static void ath9k_update_bssid_mask(struct ath_softc *sc,
> +                                 struct ath_chanctx *ctx,
> +                                 struct ath9k_vif_iter_data *iter_data)
> +{
> +     struct ath_common *common = ath9k_hw_common(sc->sc_ah);
> +     struct ath_vif *avp;
> +     int i;
> +
> +     if (!ath9k_is_chanctx_enabled())
> +             return;
> +
> +     list_for_each_entry(avp, &ctx->vifs, list) {
> +             if (ctx->nvifs_assigned != 1)
> +                     continue;
> +
> +             if (!avp->vif->p2p || !iter_data->has_hw_macaddr)
> +                     continue;
> +
> +             ether_addr_copy(common->curbssid, avp->bssid);
> +
> +             /* perm_addr will be used as the p2p device address. */
> +             for (i = 0; i < ETH_ALEN; i++)
> +                     iter_data->mask[i] &=
> +                             ~(iter_data->hw_macaddr[i] ^
> +                               sc->hw->wiphy->perm_addr[i]);
> +     }
> +}
Wouldn't it make more sense to put this into ath9k_vif_iter()

- Felix
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to