Hi,
# wl -i eth1 status
SSID: "janus"
Mode: Managed RSSI: 0 dBm SNR: 0 dB noise: -90 dBm Channel: 8l
BSSID: 2C:B0:5D:XX:XD:XX Capability: ESS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
802.11N Capable:
Chanspec: 2.4GHz channel 10 40MHz (0x2d0a)
Control channel: 8
802.11N Capabilities:
Supported MCS : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 32 ]
Security is WPA / WPA2 Personal with AES encription.
But I don't think that is has anything to do with my AP because other
people seems to have the same problem. One of them claimed that it work
better with 'iwconfig <device> freq 2.4G'.
yours sincerely
l33tname
On 10/14/2014 09:15 AM, Jes Sorensen wrote:
> Sir l33tname <[email protected]> writes:
>> Hey,
>>
>>
>> Since r8723au is out I have tried it with every kernel version.
>> But every time the connection is flaky, it works fine in the beginning
>> but after ~2 - 5 minutes it stops routing packages get slow, but
>> it shows all the time connected (on my wlan widget). With 8723au build
>> from github, none of this problems exist. (Probably because I build
>> with out Bluetooth?)
>>
>>
>> Output of modinfo
>> https://gist.github.com/fliiiix/f32d8be6c7759e318088
>>
>> Since I have no idea what you need to debug this, please just
>> ask for what I should try or what output do you like to see.
>
> Hi,
>
> Can you provide some information about the wireless access point you are
> connected to? Speeds, crypto used, etc.
>
> Jes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
