Initializing cgroup subsys cpu
Linux version 3.18.0-rc1+ (pavel@amd) (gcc version 4.9.1 (Debian 4.9.1-16) ) #4 SMP Wed Oct 22 13:10:19 CEST 2014
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f6cffff] usable
BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6defff] ACPI data
BIOS-e820: [mem 0x000000007f6df000-0x000000007f6fffff] ACPI NVS
BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
SMBIOS 2.4 present.
DMI: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DBFFF uncachable
  DC000-DFFFF write-back
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07F700000 mask FFFF00000 uncachable
  2 base 07F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped: [mem 0x00000000-0x057fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37000000-0x373fffff]
 [mem 0x37000000-0x373fffff] page 4k
BRK [0x05301000, 0x05301fff] PGTABLE
init_memory_mapping: [mem 0x30000000-0x36ffffff]
 [mem 0x30000000-0x36ffffff] page 4k
BRK [0x05302000, 0x05302fff] PGTABLE
BRK [0x05303000, 0x05303fff] PGTABLE
BRK [0x05304000, 0x05304fff] PGTABLE
BRK [0x05305000, 0x05305fff] PGTABLE
BRK [0x05306000, 0x05306fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x2fffffff]
 [mem 0x00100000-0x2fffffff] page 4k
init_memory_mapping: [mem 0x37400000-0x377fdfff]
 [mem 0x37400000-0x377fdfff] page 4k
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F67C0 000024 (v02 LENOVO)
ACPI: XSDT 0x7F6D191C 000084 (v01 LENOVO TP-7B    00002190  LTP 00000000)
ACPI: FACP 0x7F6D1A00 0000F4 (v03 LENOVO TP-7B    00002190 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140828/tbfadt-618)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20140828/tbfadt-618)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20140828/tbfadt-649)
ACPI: DSDT 0x7F6D1D90 00CFB9 (v01 LENOVO TP-7B    00002190 MSFT 0100000E)
ACPI: FACS 0x7F6F4000 000040
ACPI: SSDT 0x7F6D1BB4 0001DC (v01 LENOVO TP-7B    00002190 MSFT 0100000E)
ACPI: ECDT 0x7F6DED49 000052 (v01 LENOVO TP-7B    00002190 LNVO 00000001)
ACPI: TCPA 0x7F6DED9B 000032 (v02 LENOVO TP-7B    00002190 LNVO 00000001)
ACPI: APIC 0x7F6DEDCD 000068 (v01 LENOVO TP-7B    00002190 LNVO 00000001)
ACPI: MCFG 0x7F6DEE35 00003C (v01 LENOVO TP-7B    00002190 LNVO 00000001)
ACPI: HPET 0x7F6DEE71 000038 (v01 LENOVO TP-7B    00002190 LNVO 00000001)
ACPI: BOOT 0x7F6DEFD8 000028 (v01 LENOVO TP-7B    00002190  LTP 00000001)
ACPI: SSDT 0x7F6F2645 00025F (v01 LENOVO TP-7B    00002190 INTL 20050513)
ACPI: SSDT 0x7F6F28A4 0000A6 (v01 LENOVO TP-7B    00002190 INTL 20050513)
ACPI: SSDT 0x7F6F294A 0004F7 (v01 LENOVO TP-7B    00002190 INTL 20050513)
ACPI: SSDT 0x7F6F2E41 0001D8 (v01 LENOVO TP-7B    00002190 INTL 20050513)
ACPI: Local APIC address 0xfee00000
1150MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x377fdfff]
  HighMem  [mem 0x377fe000-0x7f6cffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x7f6cffff]
Initmem setup node 0 [mem 0x00001000-0x7f6cffff]
On node 0 totalpages: 521838
free_area_init_node: node 0, pgdat c4b9ca80, node_mem_map f6150024
  DMA zone: 36 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 1962 pages used for memmap
  Normal zone: 223230 pages, LIFO batch:31
  HighMem zone: 2590 pages used for memmap
  HighMem zone: 294610 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
e820: [mem 0x80000000-0xefffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @f77be000 s29504 r0 d31936 u61440
pcpu-alloc: s29504 r0 d31936 u61440 alloc=15*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519840
Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4 resume=/dev/sda1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007f6d0)
Initializing Movable for node 0 (00000000:00000000)
Memory: 2047620K/2087352K available (8224K kernel code, 573K rwdata, 3204K rodata, 476K init, 6844K bss, 39732K reserved, 1178440K highmem)
virtual kernel memory layout:
    fixmap  : 0xffe6f000 - 0xfffff000   (1600 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc4bbc000 - 0xc4c33000   ( 476 kB)
      .data : 0xc4808640 - 0xc4bba440   (3783 kB)
      .text : 0xc4000000 - 0xc4808640   (8225 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:440 0
CPU 0 irqstacks, hard=f5c18000 soft=f5c1a000
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     32768
... MAX_LOCKDEP_CHAINS:      65536
... CHAINHASH_SIZE:          32768
 memory used by lock dependency info: 4895 kB
 per task-struct memory footprint: 1152 bytes
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1828.778 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.55 BogoMIPS (lpj=7315112)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140828
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
debug: unmapping init [mem 0xc4c33000-0xc4c3afff]
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz (fam: 06, model: 0e, stepping: 08)
Performance Events: Core events, core PMU driver.
... version:                1
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f5d9a000 soft=f5d9c000
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Initializing CPU#1
Disabled fast string operations
TSC synchronization [CPU#0 -> CPU#1]:
Measured 579843 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7315.11 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f6fffff] (135168 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF57CBC00 000240 (v01 PmRef  Cpu0Ist  00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF5792800 00065A (v01 PmRef  Cpu0Cst  00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF5DECF00 0000C8 (v01 PmRef  Cpu1Ist  00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF5477F40 000085 (v01 PmRef  Cpu1Cst  00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140828/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140828/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xee100000-0xee17ffff]
pci 0000:00:02.0: reg 0x14: [io  0x1800-0x1807]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xee200000-0xee23ffff]
pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xee180000-0xee1fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xee240000-0xee243fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x1820-0x183f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x1840-0x185f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x1860-0x187f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0x1880-0x189f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xee444000-0xee4443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 7 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io  0x1810-0x181f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x18d0-0x18d7]
pci 0000:00:1f.2: reg 0x14: [io  0x18c4-0x18c7]
pci 0000:00:1f.2: reg 0x18: [io  0x18c8-0x18cf]
pci 0000:00:1f.2: reg 0x1c: [io  0x18c0-0x18c3]
pci 0000:00:1f.2: reg 0x20: [io  0x18b0-0x18bf]
pci 0000:00:1f.2: reg 0x24: [mem 0xee444400-0xee4447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x18e0-0x18ff]
pci 0000:02:00.0: [8086:109a] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xee01ffff]
pci 0000:02:00.0: reg 0x18: [io  0x2000-0x201f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xee0fffff]
pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xedf00000-0xedf00fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xec000000-0xedffffff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x6fff]
pci 0000:00:1c.2:   bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1c.3:   bridge window [io  0x7000-0x8fff]
pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
pci 0000:15:00.0: reg 0x10: [mem 0xe4300000-0xe4300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: [1180:0552] type 00 class 0x0c0010
pci 0000:15:00.1: reg 0x10: [mem 0xe4301000-0xe43017ff]
pci 0000:15:00.1: PME# supported from D0 D3hot D3cold
pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
pci 0000:15:00.2: reg 0x10: [mem 0xe4301800-0xe43018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x9000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xe4300000-0xe7ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed40fff] (subtractive decode)
pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
pci_bus 0000:00: on NUMA node 0
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f6d0000-0x7fffffff]
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x1000-0x107f] could not be reserved
system 00:01: [io  0x1180-0x11bf] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x15e0-0x15ef] has been reserved
system 00:01: [io  0x1600-0x165f] could not be reserved
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
pnp 00:06: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1f.0: BAR 7: [io  0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xee0fffff]
pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xec000000-0xedffffff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x6fff]
pci 0000:00:1c.2:   bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1c.3:   bridge window [io  0x7000-0x8fff]
pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
pci 0000:15:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[7]=[io  0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: res[8]=[io  0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0: BAR 10: assigned [mem 0x84000000-0x87ffffff]
pci 0000:15:00.0: BAR 7: assigned [io  0x9000-0x90ff]
pci 0000:15:00.0: BAR 8: assigned [io  0x9400-0x94ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0:   bridge window [io  0x9000-0x90ff]
pci 0000:15:00.0:   bridge window [io  0x9400-0x94ff]
pci 0000:15:00.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0:   bridge window [mem 0x84000000-0x87ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0:   bridge window [io  0x9000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xe4300000-0xe7ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff]
pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed40fff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x3000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x5000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io  0x7000-0x8fff]
pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
pci_bus 0000:15: resource 0 [io  0x9000-0xcfff]
pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:15: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:15: resource 9 [mem 0x80000000-0xfebfffff]
pci_bus 0000:15: resource 10 [mem 0xfed40000-0xfed40fff]
pci_bus 0000:16: resource 0 [io  0x9000-0x90ff]
pci_bus 0000:16: resource 1 [io  0x9400-0x94ff]
pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 3, 40960 bytes)
UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Simple Boot Flag at 0x35 set to 0x1
futex hash table entries: 512 (order: 3, 32768 bytes)
ntfs: driver 2.1.31 [Flags: R/W].
fuse init (API version 7.23)
msgmni has been set to 1697
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
usbcore: registered new interface driver udlfb
intel_idle: does not run on family 6 model 14
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
acpi device:01: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (29 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (26 C)
GHES: HEST is not enabled!
ERST DBG: ERST support is disabled.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
platform serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
[drm] Memory usable by graphics device = 256M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
[drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
loop: module loaded
nbd: registered device at major 43
fbcon: inteldrmfb (fb0) is primary device
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 16
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
scsi host4: ata_piix
scsi host5: ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata6: port disabled--ignoring
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:25:19:04
e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
iwl3945: Copyright(c) 2003-2011 Intel Corporation
iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
pci 0000:00:1e.0: enabling device (0005 -> 0007)
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:201c]
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7J0, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
Console: switching to colour frame buffer device 102x42
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 A7J0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x9000-0xcfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff:
 excluding 0xe4300000-0xe46cffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff:
 excluding 0xe0000000-0xe3ffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 19, io mem 0xee444000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-rc1+ ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-rc1+ uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-rc1+ uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.18.0-rc1+ uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.18.0-rc1+ uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver ti_usb_3410_5052
usbserial: USB Serial support registered for TI USB 3410 1 port adapter
usbserial: USB Serial support registered for TI USB 5052 2 port adapter
ftdi_elan: driver ftdi-elan
usbcore: registered new interface driver ftdi-elan
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input5
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
usbcore: registered new interface driver btusb
lguest: mapped switcher at ffe69000
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18)
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: No vmmc regulator found
sdhci-pci 0000:15:00.2: No vqmmc regulator found
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7BETD8WW (2.19 ), EC 7BHT40WW-1.13
thinkpad_acpi: Lenovo ThinkPad X60, model 17097HU
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
usb 5-1: new full-speed USB device number 2 using uhci_hcd
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010
usbcore: registered new interface driver snd-usb-audio
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Using IPI No-Shortcut mode
rtc_cmos 00:02: setting system clock to 2014-10-26 08:53:00 UTC (1414313580)
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sound hdaudioC0D0: autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Mic=0x8
sound hdaudioC0D0:      CD=0x19
PM: Checking hibernation image partition /dev/sda1
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
ALSA device list:
  #0: HDA Intel at 0xee240000 irq 17
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2045B
usb 5-1: Manufacturer: Broadcom Corp
usb 5-2: new full-speed USB device number 3 using uhci_hcd
psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
devtmpfs: mounted
debug: unmapping init [mem 0xc4bbc000-0xc4c32fff]
Write protecting the kernel text: 8228k
Write protecting the kernel read-only data: 3208k
usb 5-2: New USB device found, idVendor=0483, idProduct=2016
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Biometric Coprocessor
usb 5-2: Manufacturer: STMicroelectronics
random: systemd urandom read with 98 bits of entropy available
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86'.
systemd[1]: Failed to insert module 'ipv6'
systemd[1]: Set hostname to <duo>.
random: nonblocking pool is initialized
systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
systemd[1]: [/etc/systemd/system/cups.socket.d/cupsd-listen.conf:9] Failed to parse address value, ignoring: [::1]:631
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Expecting device dev-sda1.device...
systemd[1]: Expecting device dev-sda2.device...
systemd[1]: Expecting device dev-sda3.device...
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Unit systemd-modules-load.service entered failed state.
systemd-udevd[2002]: starting version 215
EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
e1000e 0000:02:00.0 eth1: renamed from eth0
systemd-udevd[2068]: renamed network interface eth0 to eth1
Adding 1681428k swap on /dev/sda1.  Priority:-1 extents:1 across:1681428k 
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
systemd-journald[1226]: Received request to flush runtime journal from PID 1
iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=3)
wlan0: associated
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/i915/intel_display.c:9917 intel_check_page_flip+0x90/0xa0()
Kicking stuck page flip: queued at 76093, now 76094
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
 00000000 00000000 f5c19edc c47fedd7 f5c19f08 f5c19ef8 c4037c92 000026bd
 c43bf540 f5687800 f5687a00 f549a000 f5c19f10 c4037cd6 00000009 f5c19f08
 c4a5a1c0 f5c19f24 f5c19f40 c43bf540 c4a57e18 000026bd c4a5a1c0 0001293d
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c43bf540>] ? intel_check_page_flip+0x90/0xa0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c43bf540>] intel_check_page_flip+0x90/0xa0
 [<c4396457>] i915_handle_vblank+0x47/0x90
 [<c439a968>] i915_irq_handler+0x248/0x2d0
 [<c4080065>] handle_irq_event_percpu+0x55/0x100
 [<c408013c>] handle_irq_event+0x2c/0x50
 [<c4082567>] handle_fasteoi_irq+0x67/0x110
 [<c4082500>] ? handle_simple_irq+0x70/0x70
 [<c4003ec0>] handle_irq+0x50/0x80
 <IRQ>  [<c4003837>] do_IRQ+0x37/0xb0
 [<c4807230>] common_interrupt+0x30/0x38
 [<c45af074>] ? cpuidle_enter_state+0x34/0xb0
 [<c45af1cf>] cpuidle_enter+0xf/0x20
 [<c4067990>] cpu_startup_entry+0x240/0x2b0
 [<c47fc122>] rest_init+0x92/0xa0
 [<c4bbca71>] start_kernel+0x33f/0x346
 [<c4bbc2cb>] i386_start_kernel+0x79/0x7d
---[ end trace 682ca0c0a4c79465 ]---
perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
e1000e: eth1 NIC Link is Down
wlan0: deauthenticating from 00:11:95:05:30:d7 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... 
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11481 at lib/debugobjects.c:263 debug_print_object+0x62/0x80()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x20
Modules linked in:
CPU: 0 PID: 11481 Comm: systemd-sleep Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
 00000000 00000000 eca49e10 c47fedd7 eca49e3c eca49e2c c4037c92 00000107
 c4289792 eca49e84 c4b4a790 c4a4787a eca49e44 c4037cd6 00000009 eca49e3c
 c4a481d8 eca49e58 eca49e78 c4289792 c4a477d4 00000107 c4a481d8 c4a4787a
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c4289792>] ? debug_print_object+0x62/0x80
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c4289792>] debug_print_object+0x62/0x80
 [<c4089810>] ? timer_debug_hint+0x10/0x10
 [<c428a27e>] debug_object_assert_init+0xce/0xf0
 [<c408a054>] del_timer+0x14/0x70
 [<c40c5d70>] ? laptop_sync_completion+0x20/0x80
 [<c40c5d9b>] laptop_sync_completion+0x4b/0x80
 [<c411ad15>] sys_sync+0x75/0x80
 [<c4074fdd>] pm_suspend+0xcd/0x2d0
 [<c40740e5>] state_store+0x75/0x80
 [<c40740e5>] ? state_store+0x75/0x80
 [<c4074070>] ? wakeup_count_store+0x80/0x80
 [<c42780e0>] kobj_attr_store+0x10/0x30
 [<c414c64a>] sysfs_kf_write+0x3a/0x50
 [<c414c610>] ? sysfs_file_ops+0x60/0x60
 [<c414ba19>] kernfs_fop_write+0xc9/0x160
 [<c414b950>] ? kernfs_vma_page_mkwrite+0x70/0x70
 [<c40f41b7>] vfs_write+0x87/0x1a0
 [<c40f471b>] SyS_write+0x4b/0xb0
 [<c4806c9e>] syscall_call+0x7/0x7
---[ end trace 682ca0c0a4c79466 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11481 at lib/debugobjects.c:263 debug_print_object+0x62/0x80()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x20
Modules linked in:
CPU: 0 PID: 11481 Comm: systemd-sleep Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
 00000000 00000000 eca49e10 c47fedd7 eca49e3c eca49e2c c4037c92 00000107
 c4289792 eca49e84 c4b4a790 c4a4787a eca49e44 c4037cd6 00000009 eca49e3c
 c4a481d8 eca49e58 eca49e78 c4289792 c4a477d4 00000107 c4a481d8 c4a4787a
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c4289792>] ? debug_print_object+0x62/0x80
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c4289792>] debug_print_object+0x62/0x80
 [<c4089810>] ? timer_debug_hint+0x10/0x10
 [<c428a27e>] debug_object_assert_init+0xce/0xf0
 [<c408a054>] del_timer+0x14/0x70
 [<c40c5d70>] ? laptop_sync_completion+0x20/0x80
 [<c40c5d9b>] laptop_sync_completion+0x4b/0x80
 [<c411ad15>] sys_sync+0x75/0x80
 [<c4074fdd>] pm_suspend+0xcd/0x2d0
 [<c40740e5>] state_store+0x75/0x80
 [<c40740e5>] ? state_store+0x75/0x80
 [<c4074070>] ? wakeup_count_store+0x80/0x80
 [<c42780e0>] kobj_attr_store+0x10/0x30
 [<c414c64a>] sysfs_kf_write+0x3a/0x50
 [<c414c610>] ? sysfs_file_ops+0x60/0x60
 [<c414ba19>] kernfs_fop_write+0xc9/0x160
 [<c414b950>] ? kernfs_vma_page_mkwrite+0x70/0x70
 [<c40f41b7>] vfs_write+0x87/0x1a0
 [<c40f471b>] SyS_write+0x4b/0xb0
 [<c4806c9e>] syscall_call+0x7/0x7
---[ end trace 682ca0c0a4c79467 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11481 at lib/debugobjects.c:263 debug_print_object+0x62/0x80()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x20
Modules linked in:
CPU: 0 PID: 11481 Comm: systemd-sleep Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
 00000000 00000000 eca49e10 c47fedd7 eca49e3c eca49e2c c4037c92 00000107
 c4289792 eca49e84 c4b4a790 c4a4787a eca49e44 c4037cd6 00000009 eca49e3c
 c4a481d8 eca49e58 eca49e78 c4289792 c4a477d4 00000107 c4a481d8 c4a4787a
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c4289792>] ? debug_print_object+0x62/0x80
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c4289792>] debug_print_object+0x62/0x80
 [<c4089810>] ? timer_debug_hint+0x10/0x10
 [<c428a27e>] debug_object_assert_init+0xce/0xf0
 [<c408a054>] del_timer+0x14/0x70
 [<c40c5d70>] ? laptop_sync_completion+0x20/0x80
 [<c40c5d9b>] laptop_sync_completion+0x4b/0x80
 [<c411ad15>] sys_sync+0x75/0x80
 [<c4074fdd>] pm_suspend+0xcd/0x2d0
 [<c40740e5>] state_store+0x75/0x80
 [<c40740e5>] ? state_store+0x75/0x80
 [<c4074070>] ? wakeup_count_store+0x80/0x80
 [<c42780e0>] kobj_attr_store+0x10/0x30
 [<c414c64a>] sysfs_kf_write+0x3a/0x50
 [<c414c610>] ? sysfs_file_ops+0x60/0x60
 [<c414ba19>] kernfs_fop_write+0xc9/0x160
 [<c414b950>] ? kernfs_vma_page_mkwrite+0x70/0x70
 [<c40f41b7>] vfs_write+0x87/0x1a0
 [<c40f471b>] SyS_write+0x4b/0xb0
 [<c4806c9e>] syscall_call+0x7/0x7
---[ end trace 682ca0c0a4c79468 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11481 at lib/debugobjects.c:263 debug_print_object+0x62/0x80()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x20
Modules linked in:
CPU: 0 PID: 11481 Comm: systemd-sleep Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
 00000000 00000000 eca49e10 c47fedd7 eca49e3c eca49e2c c4037c92 00000107
 c4289792 eca49e84 c4b4a790 c4a4787a eca49e44 c4037cd6 00000009 eca49e3c
 c4a481d8 eca49e58 eca49e78 c4289792 c4a477d4 00000107 c4a481d8 c4a4787a
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c4289792>] ? debug_print_object+0x62/0x80
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c4289792>] debug_print_object+0x62/0x80
 [<c4089810>] ? timer_debug_hint+0x10/0x10
 [<c428a27e>] debug_object_assert_init+0xce/0xf0
 [<c408a054>] del_timer+0x14/0x70
 [<c40c5d70>] ? laptop_sync_completion+0x20/0x80
 [<c40c5d9b>] laptop_sync_completion+0x4b/0x80
 [<c411ad15>] sys_sync+0x75/0x80
 [<c4074fdd>] pm_suspend+0xcd/0x2d0
 [<c40740e5>] state_store+0x75/0x80
 [<c40740e5>] ? state_store+0x75/0x80
 [<c4074070>] ? wakeup_count_store+0x80/0x80
 [<c42780e0>] kobj_attr_store+0x10/0x30
 [<c414c64a>] sysfs_kf_write+0x3a/0x50
 [<c414c610>] ? sysfs_file_ops+0x60/0x60
 [<c414ba19>] kernfs_fop_write+0xc9/0x160
 [<c414b950>] ? kernfs_vma_page_mkwrite+0x70/0x70
 [<c40f41b7>] vfs_write+0x87/0x1a0
 [<c40f471b>] SyS_write+0x4b/0xb0
 [<c4806c9e>] syscall_call+0x7/0x7
---[ end trace 682ca0c0a4c79469 ]---
done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.009 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 933.759 msecs
PM: suspend devices took 0.936 seconds
PM: late suspend of devices complete after 20.094 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 44.072 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.739 msecs
PM: early resume of devices complete after 2.418 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1860.845 msecs
PM: resume devices took 1.864 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=2)
wlan0: associated
e1000e: eth1 NIC Link is Down
wlan0: deauthenticating from 00:11:95:05:30:d7 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.006 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 778.256 msecs
PM: suspend devices took 0.780 seconds
PM: late suspend of devices complete after 16.063 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 44.019 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.708 msecs
PM: early resume of devices complete after 2.840 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1812.804 msecs
PM: resume devices took 1.816 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=2)
wlan0: associated
iwl3945 0000:03:00.0: Error sending C_POWER_TBL: time out after 500ms.
iwl3945 0000:03:00.0: set power fail, ret = -110
e1000e: eth1 NIC Link is Down
wlan0: deauthenticating from 00:11:95:05:30:d7 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
PM: Syncing filesystems ... 
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.151 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 761.839 msecs
PM: suspend devices took 0.764 seconds
PM: late suspend of devices complete after 16.087 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.861 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.890 msecs
PM: early resume of devices complete after 2.462 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1816.991 msecs
PM: resume devices took 1.820 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.004 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 898.267 msecs
PM: suspend devices took 0.900 seconds
PM: late suspend of devices complete after 16.117 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.949 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.919 msecs
PM: early resume of devices complete after 2.490 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1852.930 msecs
PM: resume devices took 1.856 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.006 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 742.322 msecs
PM: suspend devices took 0.744 seconds
PM: late suspend of devices complete after 16.074 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.820 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.926 msecs
PM: early resume of devices complete after 2.430 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1813.800 msecs
PM: resume devices took 1.820 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.010 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 882.262 msecs
PM: suspend devices took 0.884 seconds
PM: late suspend of devices complete after 16.115 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.941 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 41.106 msecs
PM: early resume of devices complete after 2.508 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1856.890 msecs
PM: resume devices took 1.860 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.010 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 821.846 msecs
PM: suspend devices took 0.824 seconds
PM: late suspend of devices complete after 16.088 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.851 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.926 msecs
PM: early resume of devices complete after 2.422 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1809.296 msecs
PM: resume devices took 1.812 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.009 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 674.228 msecs
PM: suspend devices took 0.676 seconds
PM: late suspend of devices complete after 16.070 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.947 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.948 msecs
PM: early resume of devices complete after 2.484 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1801.095 msecs
PM: resume devices took 1.804 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
iwl3945 0000:03:00.0: Card state received: HW:Kill SW:On
iwl3945 0000:03:00.0: Not sending command - RF KILL
iwl3945 0000:03:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
iwl3945 0000:03:00.0: Error setting new configuration (-5).
iwl3945 0000:03:00.0: Master Disable Timed Out, 100 usec
usb 5-1: USB disconnect, device number 2
usb 5-1: new full-speed USB device number 4 using uhci_hcd
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2045B
usb 5-1: Manufacturer: Broadcom Corp
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.007 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 766.243 msecs
PM: suspend devices took 0.768 seconds
PM: late suspend of devices complete after 16.100 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.917 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.862 msecs
PM: early resume of devices complete after 2.440 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
usb 5-1: reset full-speed USB device number 4 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1648.928 msecs
PM: resume devices took 1.652 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
e1000e: eth1 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.007 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.011 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 881.698 msecs
PM: suspend devices took 0.884 seconds
PM: late suspend of devices complete after 16.104 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.861 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 48.685 msecs
PM: early resume of devices complete after 2.422 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
usb 5-1: reset full-speed USB device number 4 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1801.683 msecs
PM: resume devices took 1.804 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: Selected IBSS BSSID a6:3e:52:db:91:9e based on configured SSID
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
e1000e: eth1 NIC Link is Down
wlan0: deauthenticating from 00:11:95:05:30:d7 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.029 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000000
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 713.849 msecs
PM: suspend devices took 0.716 seconds
PM: late suspend of devices complete after 16.089 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 43.919 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 40.709 msecs
PM: early resume of devices complete after 2.415 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:02: System wakeup disabled by ACPI
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
ata6: port disabled--ignoring
sd 0:0:0:0: [sda] Starting disk
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
usb 5-1: reset full-speed USB device number 4 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1805.662 msecs
PM: resume devices took 1.808 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
ieee80211 phy0: wlan0: No probe response from AP 00:11:95:05:30:d7 after 500ms, disconnecting.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: send auth to 00:11:95:05:30:d7 (try 2/3)
wlan0: send auth to 00:11:95:05:30:d7 (try 3/3)
wlan0: authentication with 00:11:95:05:30:d7 timed out
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
ieee80211 phy0: wlan0: No probe response from AP 00:11:95:05:30:d7 after 500ms, disconnecting.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
ieee80211 phy0: wlan0: No probe response from AP 00:11:95:05:30:d7 after 500ms, disconnecting.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
ieee80211 phy0: wlan0: No probe response from AP 00:11:95:05:30:d7 after 500ms, disconnecting.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
ieee80211 phy0: wlan0: No probe response from AP 00:11:95:05:30:d7 after 500ms, disconnecting.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:11:95:05:30:d7
wlan0: send auth to 00:11:95:05:30:d7 (try 1/3)
wlan0: authenticated
iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:11:95:05:30:d7 (try 1/3)
wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=1)
wlan0: associated
iwl3945 0000:03:00.0: Queue 2 stuck for 2384 ms.
iwl3945 0000:03:00.0: On demand firmware reload
iwl3945 0000:03:00.0: Master Disable Timed Out, 100 usec
ieee80211 phy0: Hardware restart was requested
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/util.c:1686 ieee80211_reconfig+0xa44/0xbc0()
Hardware became unavailable during restart.
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137e3c c47fedd7 c1137e68 c1137e58 c4037c92 00000696
 c47e7be4 fffffffb f4c10560 f4c10560 c1137e70 c4037cd6 00000009 c1137e68
 c4ae4a18 c1137e84 c1137eb0 c47e7be4 c4ada2c8 00000696 c4ae4a18 c1137e98
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e7be4>] ? ieee80211_reconfig+0xa44/0xbc0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e7be4>] ieee80211_reconfig+0xa44/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7946a ]---
wlan0: deauthenticating from 00:11:95:05:30:d7 by local choice (Reason: 3=DEAUTH_LEAVING)
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x104/0x110()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c3c c47fedd7 c1137c68 c1137c58 c4037c92 0000000c
 c47c1a54 f4c70640 f4c70000 00000001 c1137c70 c4037cd6 00000009 c1137c68
 c4ae3f84 c1137c84 c1137c9c c47c1a54 c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c1a54>] ? ieee80211_bss_info_change_notify+0x104/0x110
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47c1a54>] ieee80211_bss_info_change_notify+0x104/0x110
 [<c47efd25>] ieee80211_recalc_ps_vif+0x25/0x30
 [<c47efdb3>] ieee80211_set_disassoc+0x83/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c406ed48>] ? __lock_is_held+0x48/0x70
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7946b ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_flush_queues+0xac/0xc0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c4c c47fedd7 c1137c78 c1137c68 c4037c92 0000000c
 c47e627c f4c10560 f4c70000 0000000f c1137c80 c4037cd6 00000009 c1137c78
 c4ae3f84 c1137c94 c1137ca8 c47e627c c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e627c>] ? ieee80211_flush_queues+0xac/0xc0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e627c>] ieee80211_flush_queues+0xac/0xc0
 [<c47f0020>] ieee80211_set_disassoc+0x2f0/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c406ed48>] ? __lock_is_held+0x48/0x70
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7946c ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_flush_queues+0xac/0xc0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c40 c47fedd7 c1137c6c c1137c5c c4037c92 0000000c
 c47e627c f4c10560 f4c70000 0000000f c1137c74 c4037cd6 00000009 c1137c6c
 c4ae3f84 c1137c88 c1137c9c c47e627c c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e627c>] ? ieee80211_flush_queues+0xac/0xc0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e627c>] ieee80211_flush_queues+0xac/0xc0
 [<c47f003d>] ieee80211_set_disassoc+0x30d/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7946d ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 __sta_info_destroy_part1+0x15c/0x170()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c18 c47fedd7 c1137c44 c1137c34 c4037c92 0000000c
 c47c306c cf251800 f4c10560 f4c70640 c1137c4c c4037cd6 00000009 c1137c44
 c4ae3f84 c1137c60 c1137c78 c47c306c c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c306c>] ? __sta_info_destroy_part1+0x15c/0x170
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47c306c>] __sta_info_destroy_part1+0x15c/0x170
 [<c47c588a>] __sta_info_flush+0x10a/0x160
 [<c47efde7>] ieee80211_set_disassoc+0xb7/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7946e ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 sta_info_move_state+0x344/0x420()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c00 c47fedd7 c1137c2c c1137c1c c4037c92 0000000c
 c47c5384 00000003 cf251800 f4c70640 c1137c34 c4037cd6 00000009 c1137c2c
 c4ae3f84 c1137c48 c1137c60 c47c5384 c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c5384>] ? sta_info_move_state+0x344/0x420
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47c5384>] sta_info_move_state+0x344/0x420
 [<c47c54aa>] __sta_info_destroy_part2+0x4a/0x1b0
 [<c47c5855>] __sta_info_flush+0xd5/0x160
 [<c47efde7>] ieee80211_set_disassoc+0xb7/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7946f ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/sta_info.c:886 __sta_info_destroy_part2+0x114/0x1b0()
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c34 c47fedd7 00000000 c1137c50 c4037c92 00000376
 c47c5574 cf251800 f4c10560 f4c70640 c1137c60 c4037d1f 00000009 00000000
 c1137c78 c47c5574 c1137c70 c1137c8c c1137c94 c1137c94 c1137ca8 c47c5855
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c5574>] ? __sta_info_destroy_part2+0x114/0x1b0
 [<c4037d1f>] warn_slowpath_null+0xf/0x20
 [<c47c5574>] __sta_info_destroy_part2+0x114/0x1b0
 [<c47c5855>] __sta_info_flush+0xd5/0x160
 [<c47efde7>] ieee80211_set_disassoc+0xb7/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79470 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 __sta_info_destroy_part2+0x185/0x1b0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c18 c47fedd7 c1137c44 c1137c34 c4037c92 0000000c
 c47c55e5 cf251800 f4c10560 f4c70640 c1137c4c c4037cd6 00000009 c1137c44
 c4ae3f84 c1137c60 c1137c78 c47c55e5 c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c55e5>] ? __sta_info_destroy_part2+0x185/0x1b0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47c55e5>] __sta_info_destroy_part2+0x185/0x1b0
 [<c47c5855>] __sta_info_flush+0xd5/0x160
 [<c47efde7>] ieee80211_set_disassoc+0xb7/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79471 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/sta_info.c:894 __sta_info_destroy_part2+0x1a4/0x1b0()
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c34 c47fedd7 00000000 c1137c50 c4037c92 0000037e
 c47c5604 cf251800 f4c10560 f4c70640 c1137c60 c4037d1f 00000009 00000000
 c1137c78 c47c5604 c1137c70 c1137c8c c1137c94 c1137c94 c1137ca8 c47c5855
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c5604>] ? __sta_info_destroy_part2+0x1a4/0x1b0
 [<c4037d1f>] warn_slowpath_null+0xf/0x20
 [<c47c5604>] __sta_info_destroy_part2+0x1a4/0x1b0
 [<c47c5855>] __sta_info_flush+0xd5/0x160
 [<c47efde7>] ieee80211_set_disassoc+0xb7/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79472 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x104/0x110()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c48 c47fedd7 c1137c74 c1137c64 c4037c92 0000000c
 c47c1a54 f4c70640 f4c70000 00000001 c1137c7c c4037cd6 00000009 c1137c74
 c4ae3f84 c1137c90 c1137ca8 c47c1a54 c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c1a54>] ? ieee80211_bss_info_change_notify+0x104/0x110
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47c1a54>] ieee80211_bss_info_change_notify+0x104/0x110
 [<c47eff3b>] ieee80211_set_disassoc+0x20b/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79473 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_set_wmm_default+0x28f/0x2b0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c24 c47fedd7 c1137c50 c1137c40 c4037c92 0000000c
 c47e6b9f 00000000 f4c10560 f4c70ad8 c1137c58 c4037cd6 00000009 c1137c50
 c4ae3f84 c1137c6c c1137ca8 c47e6b9f c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e6b9f>] ? ieee80211_set_wmm_default+0x28f/0x2b0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e6b9f>] ieee80211_set_wmm_default+0x28f/0x2b0
 [<c47eff44>] ieee80211_set_disassoc+0x214/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79474 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_set_wmm_default+0x28f/0x2b0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c24 c47fedd7 c1137c50 c1137c40 c4037c92 0000000c
 c47e6b9f 00000001 f4c10560 f4c70ae2 c1137c58 c4037cd6 00000009 c1137c50
 c4ae3f84 c1137c6c c1137ca8 c47e6b9f c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e6b9f>] ? ieee80211_set_wmm_default+0x28f/0x2b0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e6b9f>] ieee80211_set_wmm_default+0x28f/0x2b0
 [<c47eff44>] ieee80211_set_disassoc+0x214/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79475 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_set_wmm_default+0x28f/0x2b0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c24 c47fedd7 c1137c50 c1137c40 c4037c92 0000000c
 c47e6b9f 00000002 f4c10560 f4c70aec c1137c58 c4037cd6 00000009 c1137c50
 c4ae3f84 c1137c6c c1137ca8 c47e6b9f c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e6b9f>] ? ieee80211_set_wmm_default+0x28f/0x2b0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e6b9f>] ieee80211_set_wmm_default+0x28f/0x2b0
 [<c47eff44>] ieee80211_set_disassoc+0x214/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79476 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_set_wmm_default+0x28f/0x2b0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c24 c47fedd7 c1137c50 c1137c40 c4037c92 0000000c
 c47e6b9f 00000003 f4c10560 f4c70af6 c1137c58 c4037cd6 00000009 c1137c50
 c4ae3f84 c1137c6c c1137ca8 c47e6b9f c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47e6b9f>] ? ieee80211_set_wmm_default+0x28f/0x2b0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47e6b9f>] ieee80211_set_wmm_default+0x28f/0x2b0
 [<c47eff44>] ieee80211_set_disassoc+0x214/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79477 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_assign_vif_chanctx+0x214/0x2a0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c1c c47fedd7 c1137c48 c1137c38 c4037c92 0000000c
 c47eb884 f4c70640 f4c10560 f4c10560 c1137c50 c4037cd6 00000009 c1137c48
 c4ae3f84 c1137c64 c1137c84 c47eb884 c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47eb884>] ? ieee80211_assign_vif_chanctx+0x214/0x2a0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47eb884>] ieee80211_assign_vif_chanctx+0x214/0x2a0
 [<c47ec817>] __ieee80211_vif_release_channel+0x47/0xe0
 [<c47ed2b9>] ieee80211_vif_release_channel+0x39/0x90
 [<c47effa2>] ieee80211_set_disassoc+0x272/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79478 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x104/0x110()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137c04 c47fedd7 c1137c30 c1137c20 c4037c92 0000000c
 c47c1a54 f4c70640 f4c70000 00000001 c1137c38 c4037cd6 00000009 c1137c30
 c4ae3f84 c1137c4c c1137c64 c47c1a54 c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47c1a54>] ? ieee80211_bss_info_change_notify+0x104/0x110
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47c1a54>] ieee80211_bss_info_change_notify+0x104/0x110
 [<c47eb7be>] ieee80211_assign_vif_chanctx+0x14e/0x2a0
 [<c47ec817>] __ieee80211_vif_release_channel+0x47/0xe0
 [<c47ed2b9>] ieee80211_vif_release_channel+0x39/0x90
 [<c47effa2>] ieee80211_set_disassoc+0x272/0x3a0
 [<c47f448c>] ieee80211_mgd_deauth+0xcc/0x1f0
 [<c47d7281>] ieee80211_deauth+0x11/0x20
 [<c47b7da7>] cfg80211_mlme_deauth+0x77/0xc0
 [<c47b7f45>] cfg80211_mlme_down+0x55/0x80
 [<c47bb3a9>] cfg80211_disconnect+0x129/0x140
 [<c479b9d9>] __cfg80211_leave+0x99/0x150
 [<c479baaf>] cfg80211_leave+0x1f/0x30
 [<c479bdfa>] cfg80211_netdev_notifier_call+0x33a/0x490
 [<c404fd11>] notifier_call_chain+0x41/0x60
 [<c404fdcc>] raw_notifier_call_chain+0xc/0x10
 [<c468e035>] call_netdevice_notifiers_info+0x25/0x50
 [<c468e2bf>] __dev_close_many+0x2f/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c79479 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30009 at net/mac80211/driver-ops.h:12 ieee80211_do_stop+0x78d/0x7b0()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Modules linked in:
CPU: 1 PID: 30009 Comm: kworker/1:2 Tainted: G        W      3.18.0-rc1+ #4
Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
Workqueue: events ieee80211_restart_work
 00000001 00000000 c1137d8c c47fedd7 c1137db8 c1137da8 c4037c92 0000000c
 c47d24cd 00000000 f4c11134 f4c70fd4 c1137dc0 c4037cd6 00000009 c1137db8
 c4ae3f84 c1137dd4 c1137e18 c47d24cd c4ad9e4f 0000000c c4ae3f84 f4c70000
Call Trace:
 [<c47fedd7>] dump_stack+0x41/0x52
 [<c4037c92>] warn_slowpath_common+0x62/0x80
 [<c47d24cd>] ? ieee80211_do_stop+0x78d/0x7b0
 [<c4037cd6>] warn_slowpath_fmt+0x26/0x30
 [<c47d24cd>] ieee80211_do_stop+0x78d/0x7b0
 [<c46aa6ac>] ? dev_deactivate_many+0x1ac/0x1f0
 [<c47d2502>] ieee80211_stop+0x12/0x20
 [<c468e2f1>] __dev_close_many+0x61/0xa0
 [<c468e39a>] dev_close_many+0x6a/0xd0
 [<c4691774>] dev_close+0x34/0x50
 [<c479b585>] cfg80211_shutdown_all_interfaces+0x35/0x90
 [<c47e7779>] ieee80211_reconfig+0x5d9/0xbc0
 [<c4804db8>] ? mutex_unlock+0x8/0x10
 [<c47c0385>] ieee80211_restart_work+0x35/0x70
 [<c404a5bf>] process_one_work+0x15f/0x390
 [<c404a569>] ? process_one_work+0x109/0x390
 [<c404ac39>] worker_thread+0x39/0x440
 [<c404ac00>] ? cancel_delayed_work+0x70/0x70
 [<c404f09e>] kthread+0xae/0xd0
 [<c4050000>] ? __srcu_notifier_call_chain+0x20/0x80
 [<c4806b41>] ret_from_kernel_thread+0x21/0x30
 [<c404eff0>] ? kthread_create_on_node+0x170/0x170
---[ end trace 682ca0c0a4c7947a ]---
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
CE: hpet increased min_delta_ns to 20115 nsec
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
CE: hpet increased min_delta_ns to 30172 nsec
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
CE: hpet increased min_delta_ns to 45258 nsec
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
CE: hpet increased min_delta_ns to 67887 nsec
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
CE: hpet increased min_delta_ns to 101830 nsec
CE: hpet increased min_delta_ns to 152745 nsec
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
usb 5-1: USB disconnect, device number 4
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
usb 5-1: new full-speed USB device number 5 using uhci_hcd
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2045B
usb 5-1: Manufacturer: Broadcom Corp
usb 5-1: USB disconnect, device number 5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
iwl3945 0000:03:00.0: Unable to initialize device after 5 attempts.
usb 5-1: new full-speed USB device number 6 using uhci_hcd
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2045B
usb 5-1: Manufacturer: Broadcom Corp
