This patch would help bring up wifi interface with default board data in case of failures in otp download. It is useful for initial caliberation.
Signed-off-by: Rajkumar Manoharan <[email protected]> --- drivers/net/wireless/ath/ath10k/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 5c23d00..2de49e4 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -31,12 +31,15 @@ unsigned int ath10k_debug_mask; static bool uart_print; static unsigned int ath10k_p2p; +static bool skip_otp; module_param_named(debug_mask, ath10k_debug_mask, uint, 0644); module_param(uart_print, bool, 0644); module_param_named(p2p, ath10k_p2p, uint, 0644); +module_param(skip_otp, bool, 0644); MODULE_PARM_DESC(debug_mask, "Debugging mask"); MODULE_PARM_DESC(uart_print, "Uart target debugging"); MODULE_PARM_DESC(p2p, "Enable ath10k P2P support"); +MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode"); static const struct ath10k_hw_params ath10k_hw_params_list[] = { { @@ -280,7 +283,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar) ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); - if (result != 0) { + if (!skip_otp && result != 0) { ath10k_err(ar, "otp calibration failed: %d", result); return -EINVAL; } -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
