On 26/11/2014 15:29, Stanislaw Gruszka wrote: > This reverts commit 2ad69ac5976191e9bb7dc4044204a504653ad1bb. It > causes wireless device disappear when we get -EPROTO error form USB > request. I encounter such situation occasionally when resume form > suspend with RT3070 adapter: > > [ 289.619985] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor > Request 0x06 failed for offset 0x0404 with error -71 > [ 289.639368] ieee80211 phy0: rt2800_wait_bbp_ready: Error - BBP register > access failed, aborting > [ 289.639374] ieee80211 phy0: rt2800usb_set_device_state: Error - Device > failed to enter state 4 (-5) > > Without the patch, except printing error, device works just fine after > resume. > > Currently after timeouts and REGISTER_BUSY_COUNT tuning, we should > not have any "endless loop", though we can wait quite long when driver > is trying to communicate with the device through non functioning USB > connection. Generally the problem that commit 2ad69ac597619 solves > is kinda artificial. > > Cc: Richard Genoud <richard.gen...@gmail.com> > Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com> > --- > drivers/net/wireless/rt2x00/rt2x00usb.c | 6 ------ > 1 file changed, 6 deletions(-) > > diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c > b/drivers/net/wireless/rt2x00/rt2x00usb.c > index c2346f8..892270d 100644 > --- a/drivers/net/wireless/rt2x00/rt2x00usb.c > +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c > @@ -64,12 +64,6 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, > } > } while (time_before(jiffies, expire)); > > - /* If the port is powered down, we get a -EPROTO error, and this > - * leads to a endless loop. So just say that the device is gone. > - */ > - if (status == -EPROTO) > - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); > - > rt2x00_err(rt2x00dev, > "Vendor Request 0x%02x failed for offset 0x%04x with error > %d\n", > request, offset, status); > It tested this serie but unfortunately, reverting this still caused an infinite loop. (cf https://lkml.org/lkml/2014/4/3/492 to reproduce)
[ 642.007812] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.023437] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.031250] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.046875] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.054687] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.062500] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.078125] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.085937] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.101562] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.117187] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.125000] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0 [ 642.132812] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.250000] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -71 [ 642.359375] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 [ 642.468750] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 [ 642.476562] ieee80211 phy0: rt2800usb_watchdog: Warning - TX HW queue 1 timed out, invoke forced kick [ 642.585937] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0408 with error -71 [ 642.695312] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0408 with error -71 [ 642.718750] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.734375] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.742187] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.757812] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.765625] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.773437] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.789062] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.796875] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.812500] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 642.820312] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 0 [ 642.835937] ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [...] So it seems the "forced kick" is not done With patches 1-3 applied but not this one, I've got: [ 154.015625] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.031250] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.039062] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.054687] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.062500] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.070312] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.085937] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.093750] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.109375] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.117187] ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0 [ 154.132812] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 154.242187] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 [ 154.250000] ieee80211 phy1: rt2800usb_watchdog: Warning - TX HW queue 0 timed out, invoke forced kick [ 154.765625] cfg80211: Calling CRDA to update world regulatory domain [ 155.710937] wlan0: authenticate with 00:17:9a:84:fb:94 [ 155.718750] wlan0: send auth to 00:17:9a:84:fb:94 (try 1/3) [ 155.726562] wlan0: send auth to 00:17:9a:84:fb:94 (try 2/3) [ 155.734375] wlan0: send auth to 00:17:9a:84:fb:94 (try 3/3) [ 155.742187] wlan0: authentication with 00:17:9a:84:fb:94 timed out Here, the forced kick is done. Richard -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
