Some firmware revisions need peer phymode to be
specified as MODE_11B when associating as station
to a 11b AP. Otherwise they can starve other
stations.
Signed-off-by: Michal Kazior <michal.kaz...@tieto.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c
b/drivers/net/wireless/ath/ath10k/mac.c
index fe61201..950322d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1416,6 +1416,12 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
}
}
+static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
+{
+ /* First 4 rates in ath10k_rates are CCK (11b) rates. */
+ return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4;
+}
+
static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -1430,8 +1436,10 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k
*ar,
phymode = MODE_11NG_HT40;
else
phymode = MODE_11NG_HT20;
- } else {
+ } else if (ath10k_mac_sta_has_11g_rates(sta)) {
phymode = MODE_11G;
+ } else {
+ phymode = MODE_11B;
}
break;
@@ -4724,6 +4732,9 @@ static const struct ieee80211_channel
ath10k_5ghz_channels[] = {
CHAN5G(165, 5825, 0),
};
+/* Note: Be careful if you re-order these. There is code which depends on this
+ * ordering.
+ */
static struct ieee80211_rate ath10k_rates[] = {
/* CCK */
RATETAB_ENT(10, 0x82, 0),
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
