This fix TX problem when IBSS connected and enabled HT rates. Before we used 6Mbps all the time.
Reported-by: Yeoh Chun-Yeow <[email protected]> Signed-off-by: Janusz Dziedzic <[email protected]> --- drivers/net/wireless/ath/ath10k/mac.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 5475f0f..d358dab 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1408,6 +1408,7 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar, } break; case WMI_VDEV_TYPE_STA: + case WMI_VDEV_TYPE_IBSS: if (vif->bss_conf.qos) arg->peer_flags |= WMI_PEER_QOS; break; @@ -1635,6 +1636,17 @@ static int ath10k_station_assoc(struct ath10k *ar, return ret; } + if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { + ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, + WMI_PEER_NSS, sta->rx_nss); + if (ret) { + ath10k_warn(ar, "failed to set nss param %d for STA %pM vdet %i: %d\n", + sta->rx_nss, sta->addr, + arvif->vdev_id, ret); + return ret; + } + } + /* Re-assoc is run only to update supported rates for given station. It * doesn't make much sense to reconfigure the peer completely. */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
