The DMA engine will reset the valid bit after a descriptor is complete; any with the valid bit still set may still be in use by the hardware, so check that before freeing the descriptor.
Signed-off-by: Bob Copeland <[email protected]> --- drivers/net/wireless/ath/wcn36xx/dxe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c index 73f12f1..3d6bc9b 100644 --- a/drivers/net/wireless/ath/wcn36xx/dxe.c +++ b/drivers/net/wireless/ath/wcn36xx/dxe.c @@ -354,6 +354,8 @@ static void reap_tx_dxes(struct wcn36xx *wcn, struct wcn36xx_dxe_ch *ch) * and while-do will not make any cycles. */ do { + if (ctl->desc->ctrl & WCN36XX_DXE_CTRL_VALID_MASK) + break; if (ctl->skb) { dma_unmap_single(NULL, ctl->desc->src_addr_l, ctl->skb->len, DMA_TO_DEVICE); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
