Add an option "blink" to enable or disable the LED blink. The default value is set to 1 so that existing users would not experience any unexpected changes.
Signed-off-by: Hong Xu <[email protected]> --- drivers/net/wireless/ath/ath9k/htc.h | 3 +++ drivers/net/wireless/ath/ath9k/htc_drv_gpio.c | 4 ++++ drivers/net/wireless/ath/ath9k/htc_drv_init.c | 4 ++++ 3 files changed, 11 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 9dde265..c43fec5 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -44,6 +44,9 @@ extern struct ieee80211_ops ath9k_htc_ops; extern int htc_modparam_nohwcrypt; +#ifdef CONFIG_MAC80211_LEDS +extern int led_blink; +#endif enum htc_phymode { HTC_MODE_11NA = 0, diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c index 50f74a2..998b558 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c @@ -279,6 +279,10 @@ void ath9k_init_leds(struct ath9k_htc_priv *priv) else priv->ah->led_pin = ATH_LED_PIN_DEF; + if (!led_blink) + priv->led_cdev.default_trigger = + ieee80211_get_radio_led_name(priv->hw); + ath9k_configure_leds(priv); snprintf(priv->led_name, sizeof(priv->led_name), diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index e8fa944..9470127 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -39,6 +39,10 @@ module_param_named(ps_enable, ath9k_ps_enable, int, 0444); MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); #ifdef CONFIG_MAC80211_LEDS +int led_blink = 1; +module_param_named(blink, led_blink, int, 0444); +MODULE_PARM_DESC(blink, "Enable LED blink on activity"); + static const struct ieee80211_tpt_blink ath9k_htc_tpt_blink[] = { { .throughput = 0 * 1024, .blink_time = 334 }, { .throughput = 1 * 1024, .blink_time = 260 }, -- 2.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
