From: Haim Dreyfuss <[email protected]> Fragmented scan should be applied for all channels, passive and active. When scanning on passive channels the firmware uses frag_passive_dwell to define the maximum continuous scan time before returning to the operating channel. On active channels max_out_time is the parameter used by the firmware to define the maximum time allowed out of the operating channel. Since active channels' scan should also be fragmented set max_out_time equal to frag_passive_dwell. In addition: - Set max_out_time and suspend_time if the firmware doesn't support fragmented scan to avoid unexpected behavior. - Adjust max_out_time for second level of scan precedence.
Signed-off-by: Haim Dreyfuss <[email protected]> Reviewed-by: Alexander Bondar <[email protected]> Signed-off-by: Emmanuel Grumbach <[email protected]> --- drivers/net/wireless/iwlwifi/mvm/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 199f6fc..0ee0f81 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -309,18 +309,18 @@ static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm, goto not_bound; params->suspend_time = 30; - params->max_out_time = 170; + params->max_out_time = 120; if (iwl_mvm_low_latency(mvm)) { if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_FRAGMENTED_SCAN) { params->suspend_time = 105; - params->max_out_time = 70; /* * If there is more than one active interface make * passive scan more fragmented. */ frag_passive_dwell = (global_cnt < 2) ? 40 : 20; + params->max_out_time = frag_passive_dwell; } else { params->suspend_time = 120; params->max_out_time = 120; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
