After rtl8192cu download firmware routine, set fw_ready flag.
Signed-off-by: Taehee Yoo <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 5513217..2468850 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1000,6 +1000,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
local_save_flags(flags);
local_irq_enable();
+ rtlhal->fw_ready = false;
rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
err = _rtl92cu_init_mac(hw);
if (err) {
@@ -1013,6 +1014,8 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
err = 1;
goto exit;
}
+
+ rtlhal->fw_ready = true;
rtlhal->last_hmeboxnum = 0; /* h2c */
_rtl92cu_phy_param_tab_init(hw);
rtl92cu_phy_mac_config(hw);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
