In the Tx, work around used to force destination index 0 to be used. This is no more necessary, as firmware supports multiple destinations
Signed-off-by: Vladimir Kondratiev <[email protected]> --- drivers/net/wireless/ath/wil6210/txrx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 0499ebc..24c4b9a 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -873,9 +873,6 @@ static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len, d->mac.d[1] = 0; d->mac.d[2] = 0; d->mac.ucode_cmd = 0; - /* use dst index 0 */ - d->mac.d[1] |= BIT(MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS) | - (0 << MAC_CFG_DESC_TX_1_DST_INDEX_POS); /* translation type: 0 - bypass; 1 - 802.3; 2 - native wifi */ d->mac.d[2] = BIT(MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS) | (1 << MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS); -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
