On 02/09/15 18:57, Steeve Morin wrote:
Hi linux-wireless,
I'm running brcmfmac from backports-3.19-rc1-1 on linux 3.10. running
on an arm Amlogic S805 (cortex-a5, arm7) board (CX-S859).
I had to apply multiple custom patches [1]:
- Make sure the wifi chip is on via custom GPIO [1]
- Remove a problematic piece of code related to power manager (will
look into it later) [1]
- Mix the mmc->max_blk_count on the host (would cause a BUG_ON
assertion later on) [2] [3]
After that, I am able to modprobe brcmfmac see wlan0.
The interface correctly scans for wifi aps, and I can connect to
unprotected ones.
It fails, however, to connect to WPA/WPA2 protected aps. I have
attached a debug log obtained with debug=0xffffff [4]
I don't see any errors in it though...
Would anyone of you guys have any idea why ?
In the log I don't see any connect attempt. Only seeing a scan
completing. So how do you try to connect?
Regards,
Arend
Thanks a lot,
[1]
https://gist.github.com/steeve/10a9a643476cea99abf4#file-backports-power-on-wifi-sdio-patch
[2]
https://gist.github.com/steeve/10a9a643476cea99abf4#file-fix-block-size-patch
[3]
https://github.com/codesnake/linux-amlogic/blob/master/drivers/amlogic/mmc/aml_sdio.c#L317
[4] https://gist.github.com/steeve/10a9a643476cea99abf4#file-003-dmesg-log
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
