On 03/10/2015 11:10 PM, Janusz Dziedzic wrote: > On 11 March 2015 at 00:00, <gree...@candelatech.com> wrote: >> From: Ben Greear <gree...@candelatech.com> >> >> This allows one to configure exactly one rate for drivers >> such as ath10k that will only allow a single rate to be >> configured. >> > > Hello, > > But iw already support setting single rate with ath10k. > This is example from ath10k commit log:
Ahh, I see. I was confused about what syntax to use for 'iw', must have typo'd something early on and then though the limitation was in the parser. Thanks, Ben > > Example: > iw wlanX set bitrates legacy-5 ht-mcs-5 vht-mcs-5 2:9 > will setup VHT, nss=2, mcs=9 > > iw wlanX set bitrates legacy-5 18 ht-mcs-5 vht-mcs-5 > will setup legacy, 18Mbps > > iw wlanX set bitrates legacy-5 ht-mcs-5 3 vht-mcs-5 > will setup HT, nss=1, mcs=3 > > iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9 > will setup nss=1 > > iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9 2:0-9 > will setup nss=2 > > BR > Janusz > -- Ben Greear <gree...@candelatech.com> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
