On 03/25/2015 01:58 PM, Eliad Peller wrote: > hi Marc, > > On Wed, Mar 25, 2015 at 2:27 PM, Marc Kleine-Budde <[email protected]> > wrote: >> On 12/29/2014 07:24 AM, Eliad Peller wrote: >>> From: Kobi L <[email protected]> >>> >>> Enable ELP authorization in AP mode and enable the use >>> of the wakeup bit in the ELP register. >>> >>> Introduce AP role sleep configuration which is disabled >>> by default. When configured, it allows the AP to sleep >>> when ELP is authorized for it. >>> >>> Signed-off-by: Kobi Leibovitch <[email protected]> >>> Signed-off-by: Arik Nemtsov <[email protected]> >>> Signed-off-by: Eliad Peller <[email protected]> >> >> [...] >> >> >> This patch requires a new firmware, loading of "wl18xx-conf.bin" from >> [1] fails with: >> >>> wlcore: ERROR configuration binary file size is wrong, expected 1226 got >>> 1221 >> > thanks. seems you're right. > > anyway, note that this file is not actual fw, but only the default > configuration params. > you can just delete it, and the driver will load just fine. > you can then recreate it with something like: > cat /sys/kernel/debug/ieee80211/phy0/wlcore/wl18xx/conf > > /lib/firmware/ti-connectivity/wl18xx-conf.bin > > actually, i don't think it makes much sense to have this file in the > linux-firmware git at all. > i'll try handling it.
Thanks, there are more file with size of ~1k, are they optional, too? What's the "error" message if these optional files are not present? From working with $CUSTOMERS I gained the impression, messages like "error failed to load...." for optional file don't shine the best light on Linux, a neutral "using default values" is far better. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
