On 03/25/2015 08:34 AM, Jose Antonio Delgado Alfonso wrote: > Hi all, > > I would like to ask Qualcomm's collaborators about this topic. > > We are trying to certify a AP product which uses QCA988x radio module. > We are using the ath10k driver (kernel v3.17.8) and firmware from Ben > Greear. We are trying to pass the Dynamic Channel test, which consists > in setting the radio at 80MHz and, at the same time, setting other > signal in the secondary channel. So far, the radio module does not > reduce the bandwidth and remains transmitting at 80MHz. > > Please, Does someone know if Dynamic Channel Access is really supported > by ath10k driver in newest kernel versions? > Or, does it also depends on the firmware version?
You could try testing with the upstream firmware and see if that works any better? Even if it is unstable under load, it should at least be able to run long enough to do a feature test like this. If it works on 10.1.467 upstream firmware but not on mine, then probably it is a regression and I should be able to fix it. Thanks, Ben > > Thanks in advance. > > Regards, > Jose Delgado > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Ben Greear <gree...@candelatech.com> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
