On Wed, 2015-04-01 at 08:06 +0200, Janusz Dziedzic wrote:
> Hello,
>
> Seems this one break IBSS case when started from wpa_supplicant at
> least for Intel7260 and ath10k where dedicated p2p_device is used.
>
> This is wpa_supplicant log:
> 1427867673.149187: nl80211: Set mode ifindex 8 iftype 1 (ADHOC)
> 1427867673.149225: nl80211: Mode change succeeded while interface is down
> 1427867673.149234: Could not set interface wlan3 flags (UP): Device or
> resource busy
That's actually the correct behaviour, given the interface limitations,
at least for iwlmvm devices:
iw list
[...]
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* P2P-client
* P2P-GO
* P2P-device
[...]
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{
P2P-device } <= 1,
total <= 3, #channels <= 2
So there's no combination with P2P-device and IBSS together.
In our device I'm pretty sure the two couldn't be supported together.
Perhaps the supplicant has issues though with how it creates the
P2P-Device? Should probably not be there if you have IBSS, it's pretty
useless anyway then. Or at least not be there if the driver doesn't
advertise support for that combination.
johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
