I'm testing to send a VLAN frame through ATH10K device.
I'm using compat wireless 2015-03-09 from openWRT. The ATH10K firmware
used is 10.2.4.45
My test platform is:
Pc1 : IP 10.101.4.3 (without VLAN)
VLAN 1 : IP 192.168.5.1
Equipment in AP mode. The netdev is bridged with eth0
Equipment in client mode with WDS mode enables. The client is
connected to the AP. The netdev is bridged with eth0.
AP and client use ATH10K wireless card.
PC2: IP 10.101.4.4 (without VLAN)
VLAN 1 : IP 192.168.5.2
The PC1 is connected to the equipment in AP mode and the PC2 is
connected to the equipment in client mode.
I can ping from PC1 to PC2 without vlan (ping 10.101.4.4).
I cannot ping from PC1 to PC2 with VLAN.
With tcpdump I checked the vlan frame is sent to the netdev but this
frame is not send to the air.
Is it possible to send a VLAN frame through ATH10K? If no, is it a
driver limitation or firmware limitation?
Thanks for your help.
Cédric.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
