For 8000 series, we need to access the device to know what
firmware to load. Before we do so, we need to prepare the
device otherwise we might not be able to access the
hardware.
Fixes: c278754a21e6 ("iwlwifi: mvm: support family 8000 B2/C steps")
CC: <[email protected]> [4.1]
Signed-off-by: Emmanuel Grumbach <[email protected]>
---
drivers/net/wireless/iwlwifi/pcie/trans.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c
b/drivers/net/wireless/iwlwifi/pcie/trans.c
index fe61d0a..6203c4a 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -2551,6 +2551,12 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev
*pdev,
trans->hw_rev = (trans->hw_rev & 0xfff0) |
(CSR_HW_REV_STEP(trans->hw_rev << 2) << 2);
+ ret = iwl_pcie_prepare_card_hw(trans);
+ if (ret) {
+ IWL_WARN(trans, "Exit HW not ready\n");
+ goto out_pci_disable_msi;
+ }
+
/*
* in-order to recognize C step driver should read chip version
* id located at the AUX bus MISC address space.
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
