This patch enables MU-MIMO transmit beamforming support for QCA99X0 chipsets.
Signed-off-by: Vivek Natarajan <[email protected]> --- drivers/net/wireless/ath/ath10k/mac.c | 44 +++++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 5 ++++ 2 files changed, 49 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 0b31331..bfaeabb 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4063,6 +4063,43 @@ static u32 get_nss_from_chainmask(u16 chain_mask) return 1; } +static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif) +{ + u32 value = 0; + struct ath10k *ar = arvif->ar; + + if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_BEFORE_ASSOC) + return 0; + + if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) + value |= SM((ar->num_rf_chains - 1), WMI_TXBF_STS_CAP_OFFSET); + + if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | + IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) + value |= SM((ar->num_rf_chains - 1), WMI_BF_SOUND_DIM_OFFSET); + + if (!value) + return 0; + + if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) + value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; + + if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) + value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFER | + WMI_VDEV_PARAM_TXBF_SU_TX_BFER); + + if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) + value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; + + if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) + value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFEE | + WMI_VDEV_PARAM_TXBF_SU_TX_BFEE); + + return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, + ar->wmi.vdev_param->txbf, value); +} + /* * TODO: * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE, @@ -4281,6 +4318,13 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, } } + ret = ath10k_mac_set_txbf_conf(arvif); + if (ret) { + ath10k_warn(ar, "failed to set txbf for vdev %d: %d\n", + arvif->vdev_id, ret); + goto err_peer_delete; + } + ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold); if (ret) { ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n", diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 0a41ec4..a544292 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4637,6 +4637,11 @@ enum wmi_10_4_vdev_param { #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) +#define WMI_TXBF_STS_CAP_OFFSET_LSB 4 +#define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 +#define WMI_BF_SOUND_DIM_OFFSET_LSB 8 +#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 + /* slot time long */ #define WMI_VDEV_SLOT_TIME_LONG 0x1 /* slot time short */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
