The frequency at which cycle/rx_clear counters are running might
change from one target type to another. QCA99X0 is running the
counters at 150Mhz while QCA9888X and QCA6174 are running at 88Mhz.
Add a new entry to hw_params to store the target specific frequency
and use it in msecs conversion. This change fixes inconsistent
channel active/busy time.
Signed-off-by: Vasanthakumar Thiagarajan <vthia...@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 5 +++++
drivers/net/wireless/ath/ath10k/core.h | 2 ++
drivers/net/wireless/ath/ath10k/hw.c | 4 ++--
drivers/net/wireless/ath/ath10k/hw.h | 3 +--
4 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index 2551067..2efd4e4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,6 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[]
= {
.uart_pin = 7,
.has_shifted_cc_wraparound = true,
.otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[]
= {
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -83,6 +85,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[]
= {
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
@@ -98,6 +101,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[]
= {
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
@@ -115,6 +119,7 @@ static const struct ath10k_hw_params
ath10k_hw_params_list[] = {
.uart_pin = 7,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
+ .channel_counters_freq_hz = 150000,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
diff --git a/drivers/net/wireless/ath/ath10k/core.h
b/drivers/net/wireless/ath/ath10k/core.h
index 6a387ba..862f6d0 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -609,6 +609,8 @@ struct ath10k {
*/
bool continuous_frag_desc;
+ u32 channel_counters_freq_hz;
+
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
diff --git a/drivers/net/wireless/ath/ath10k/hw.c
b/drivers/net/wireless/ath/ath10k/hw.c
index fef7ccf..7b84d08 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -152,6 +152,6 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct
survey_info *survey,
cc -= cc_prev - cc_fix;
rcc -= rcc_prev;
- survey->time = CCNT_TO_MSEC(cc);
- survey->time_busy = CCNT_TO_MSEC(rcc);
+ survey->time = CCNT_TO_MSEC(ar, cc);
+ survey->time_busy = CCNT_TO_MSEC(ar, rcc);
}
diff --git a/drivers/net/wireless/ath/ath10k/hw.h
b/drivers/net/wireless/ath/ath10k/hw.h
index d9de4a7..23afcda 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -552,8 +552,7 @@ enum ath10k_hw_rate_cck {
#define SCRATCH_3_ADDRESS ar->regs->scratch_3_address
#define CPU_INTR_ADDRESS 0x0010
-/* Cycle counters are running at 88MHz */
-#define CCNT_TO_MSEC(x) ((x) / 88000)
+#define CCNT_TO_MSEC(ar, x) ((x) / ar->hw_params.channel_counters_freq_hz)
/* Firmware indications to the Host via SCRATCH_3 register. */
#define FW_INDICATOR_ADDRESS ar->regs->fw_indicator_address
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
