Here is the changelog note. This particular improvement does not require
any driver patches as far as I know. I tested this on my 4.0.4+ kernel.
Should be useful for anyone doing sniffing with ath10k.
* Allow monitor mode to receive 'Association Request', block-ack action
frames,
nodata frames, TYPE-CTL frames. Previously, these were not delivered to
the WMI interface, and the kernel driver is configured to drop mgmt frames
in
the normal RX htt datapath, so host never saw them.
This makes sniffing with ath10k a lot more useful. When no monitor
devices are
active, the firmware reverts to the previous behaviour. I guess the idea
is that
this is an optimization and keeps some un-needed frames off the host.
http://www.candelatech.com/ath10k.php
I'd be curious to know if anyone finds any bugs with this. It is possible
that my changes could cause duplicate frames to be received in monitor mode,
so please keep an eye out for that.
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
