> Kalle Valo [mailto:[email protected]] writes:
>
> David Lin <[email protected]> writes:
>
> > The Linux driver for WRT1900AC. The work was initially developed as
> > part of openwrt effort and maintained on https://github.com/kaloz/mwlwifi.
> >
> > This is still work in progress, with 8864 chipset more mature and
> > tested, while 8897 for the similar use case is added recently.
> >
> > Signed-off-by: David Lin <[email protected]>
>
> [...]
>
> > +static void mwl_reg_notifier(struct wiphy *wiphy,
> > + struct regulatory_request *request) { #ifdef
> > CONFIG_OF
> > + struct ieee80211_hw *hw;
> > + struct mwl_priv *priv;
> > + struct property *prop;
> > + struct property *fcc_prop = NULL;
> > + struct property *etsi_prop = NULL;
> > + struct property *specific_prop = NULL;
> > + u32 prop_value;
> > + int i, j, k;
> > +
> > + hw = (struct ieee80211_hw *)wiphy_priv(wiphy);
> > + priv = hw->priv;
> > +
> > + if (priv->pwr_node) {
> > + for_each_property_of_node(priv->pwr_node, prop) {
> > + if (strcmp(prop->name, "FCC") == 0)
> > + fcc_prop = prop;
> > + if (strcmp(prop->name, "ETSI") == 0)
> > + etsi_prop = prop;
> > + if ((prop->name[0] == request->alpha2[0]) &&
> > + (prop->name[1] == request->alpha2[1]))
> > + specific_prop = prop;
> > + }
> > +
> > + prop = NULL;
> > +
> > + if (specific_prop) {
> > + prop = specific_prop;
> > + } else {
> > + if (request->dfs_region == NL80211_DFS_ETSI)
> > + prop = etsi_prop;
> > + else
> > + prop = fcc_prop;
> > + }
> > +
> > + if (prop) {
> > + /* Reset the whole table */
> > + for (i = 0; i < SYSADPT_MAX_NUM_CHANNELS; i++)
> > + memset(&priv->tx_pwr_tbl[i], 0,
> > + sizeof(struct mwl_tx_pwr_tbl));
> > +
> > + /* Load related power table */
> > + i = 0;
> > + j = 0;
> > + while (i < prop->length) {
> > + prop_value =
> > + be32_to_cpu(*(__be32 *)
> > + (prop->value + i));
> > + priv->tx_pwr_tbl[j].channel = prop_value;
> > + i += 4;
> > + prop_value =
> > + be32_to_cpu(*(__be32 *)
> > + (prop->value + i));
> > + priv->tx_pwr_tbl[j].setcap = prop_value;
> > + i += 4;
> > + for (k = 0; k < SYSADPT_TX_POWER_LEVEL_TOTAL;
> > + k++) {
> > + prop_value =
> > + be32_to_cpu(*(__be32 *)
> > + (prop->value + i));
> > + priv->tx_pwr_tbl[j].tx_power[k] =
> > + prop_value;
> > + i += 4;
> > + }
> > + prop_value =
> > + be32_to_cpu(*(__be32 *)
> > + (prop->value + i));
> > + priv->tx_pwr_tbl[j].cdd =
> > + (prop_value == 0) ? false : true;
> > + i += 4;
> > + prop_value =
> > + be32_to_cpu(*(__be32 *)
> > + (prop->value + i));
> > + priv->tx_pwr_tbl[j].txantenna2 = prop_value;
> > + i += 4;
> > + j++;
> > + }
> > +
> > + /* Dump loaded power tabel */
> > + wiphy_info(hw->wiphy, "%s: %s\n", dev_name(&wiphy->dev),
> > + prop->name);
> > + for (i = 0; i < SYSADPT_MAX_NUM_CHANNELS; i++) {
> > + struct mwl_tx_pwr_tbl *pwr_tbl;
> > + char disp_buf[64];
> > + char *disp_ptr;
> > +
> > + pwr_tbl = &priv->tx_pwr_tbl[i];
> > + if (pwr_tbl->channel == 0)
> > + break;
> > + wiphy_info(hw->wiphy,
> > + "Channel: %d: 0x%x 0x%x 0x%x\n",
> > + pwr_tbl->channel,
> > + pwr_tbl->setcap,
> > + pwr_tbl->cdd,
> > + pwr_tbl->txantenna2);
> > + disp_ptr = disp_buf;
> > + for (j = 0; j < SYSADPT_TX_POWER_LEVEL_TOTAL;
> > + j++) {
> > + disp_ptr +=
> > + sprintf(disp_ptr, "%x ",
> > + pwr_tbl->tx_power[j]);
> > + }
> > + wiphy_info(hw->wiphy, "%s\n", disp_buf);
> > + }
> > + }
> > + }
> > +#endif
> > +}
> > +
> > +static void mwl_process_of_dts(struct mwl_priv *priv) { #ifdef
> > +CONFIG_OF
> > + struct property *prop;
> > + u32 prop_value;
> > +
> > + priv->dt_node =
> > + of_find_node_by_name(pci_bus_to_OF_node(priv->pdev->bus),
> > + "mwlwifi");
> > + if (!priv->dt_node)
> > + return;
> > +
> > + /* look for all matching property names */
> > + for_each_property_of_node(priv->dt_node, prop) {
> > + if (strcmp(prop->name, "marvell,2ghz") == 0)
> > + priv->disable_2g = true;
> > + if (strcmp(prop->name, "marvell,5ghz") == 0)
> > + priv->disable_5g = true;
> > + if (strcmp(prop->name, "marvell,chainmask") == 0) {
> > + prop_value = be32_to_cpu(*((__be32 *)prop->value));
> > + if (prop_value == 2)
> > + priv->antenna_tx = ANTENNA_TX_2;
> > +
> > + prop_value = be32_to_cpu(*((__be32 *)
> > + (prop->value + 4)));
> > + if (prop_value == 2)
> > + priv->antenna_rx = ANTENNA_RX_2;
> > + }
> > + }
> > +
> > + priv->pwr_node = of_find_node_by_name(priv->dt_node,
> > + "marvell,powertable");
> > +#endif
> > +}
>
> The device tree bindings need a proper document in
> Documentation/devicetree/bindings and reviewed by the device tree folks.
> That might take some time as I suspect having something like regdomain in DT
> will be problematic, so I recommend to take this out from initial submission
> and resend later once properly acked by the device tree maintainers.
>
The code is used to handle mwlwifi proprietary parameters in DTS file.
Basically it won't be conflicted with any existing bindings. Should I still
take them out from initial submission?
pcie-controller {
pcie@1,0 {
mwlwifi {
marvell,2ghz = <0>;
marvell,chainmask = <2 2>;
marvell,powertable {
*
*
*
};
};
};
};
> --
> Kalle Valo
Thanks,
David
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
