On Wed, Oct 21, 2015 at 04:15 AM CEST, Jes Sorensen <[email protected]>
wrote:
> Jakub Sitnicki <[email protected]> writes:
>> As opposed to the vendor driver (rtl8188eu), extract from efuse only
>> these TX power values that are going to be of use later on.
>>
>> Signed-off-by: Jakub Sitnicki <[email protected]>
>> ---
>> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 35
>> +++++++++++++++++++++++-
>> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 24 ++++++++++++++++
>> 2 files changed, 58 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
>> b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
>> index 344161b..90da707 100644
>> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
>> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
>> @@ -1900,7 +1900,40 @@ static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv
>> *priv)
>>
>> static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
>> {
>> - return -EOPNOTSUPP; /* Not implemented */
>> + struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188;
>> + struct rtl8188eu_tx_power *tx_power = &priv->tx_power.tx_power8188;
>> +
>> + if (efuse->rtl_id != cpu_to_le16(0x8129))
>> + return -EINVAL;
>> +
>> + ether_addr_copy(priv->mac_addr, efuse->mac_addr);
>> +
>> + memcpy(tx_power->cck_index_A,
>> + efuse->tx_power.cck_index_A,
>> + sizeof(tx_power->cck_index_A));
>> +
>> + memcpy(tx_power->ht40_1s_index_A,
>> + efuse->tx_power.ht40_1s_index_A,
>> + sizeof(tx_power->ht40_1s_index_A));
>> +
>> + memcpy(tx_power->ht20_ofdm_index_diff,
>> + efuse->tx_power.ht20_ofdm_index_diff,
>> + sizeof(tx_power->ht20_ofdm_index_diff));
>> +
>> + dev_info(&priv->udev->dev, "Vendor: %.7s\n",
>> + efuse->vendor_name);
>> + dev_info(&priv->udev->dev, "Product: %.11s\n",
>> + efuse->device_name);
>> +
>> + /* XXX: Do we need to read the rf_regulatory flag? */
>> +
>> + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
>> + print_hex_dump_bytes("rtl8xxxu: ", DUMP_PREFIX_OFFSET,
>> + priv->efuse_wifi.raw,
>> + sizeof(priv->efuse_wifi.raw));
>> + }
>> +
>> + return 0;
>> }
>>
>> static int
>> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
>> b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
>> index 79f47e3..ec49504 100644
>> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
>> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
>> @@ -507,6 +507,22 @@ struct rtl8192cu_efuse {
>> u8 customer_id;
>> };
>>
>> +struct rtl8188eu_efuse {
>> + __le16 rtl_id;
>> + u8 res0[0x0e];
>> + struct { /* 0x10 */
>> + u8 cck_index_A[6];
>> + u8 ht40_1s_index_A[5];
>> + struct nibble_pair ht20_ofdm_index_diff[1];
>> + } tx_power;
>> + u8 res1[0xbb];
>> + u8 mac_addr[ETH_ALEN]; /* 0xd7 */
>> + u8 res2[0x02];
>> + u8 vendor_name[7]; /* 0xdf */
>> + u8 res3[0x02];
>> + u8 device_name[11]; /* 0xe8 */
>> +};
>
> This is incomplete - I think it should look more like this:
>
> struct rtl8188eu_efuse {
> __le16 rtl_id;
> u8 res0[0x0e];
> u8 cck_tx_power_index_A[3]; /* 0x10 */
> u8 cck_tx_power_index_B[3];
> u8 ht40_1s_tx_power_index_A[3]; /* 0x16 */
> u8 ht40_1s_tx_power_index_B[3];
> u8 res1[0x9c];
> u8 channel_plan; /* 0xb8 */
> u8 xtal_k;
> u8 thermal_meter;
> u8 iqk_lck;
> u8 res2[5];
> u8 rf_board_option;
> u8 rf_feature_option;
> u8 rf_bt_setting;
> u8 eeprom_version;
> u8 eeprom_customer_id;
> u8 res3[3];
> u8 rf_antenna_option; /* 0xc9 */
> u8 res4[6];
> u8 vid; /* 0xd0 */
> u8 res5[1];
> u8 pid; /* 0xd2 */
> u8 res6[1];
> u8 usb_optional_function;
> u8 res7[2];
> u8 mac_addr[ETH_ALEN]; /* 0xd7 */
> u8 res8[2];
> u8 vendor_name[7];
> u8 res9[2];
> u8 device_name[0x0b]; /* 0xe8 */
> u8 res10[2];
> u8 serial[0x0b]; /* 0xf5 */
> u8 res11[0x30];
> u8 unknown[0x0d]; /* 0x130 */
> u8 res12[0xc3];
> };
The approach I took here was to add only the fields that I needed so
far. But you're right, in full, it should like that, apart from the
tx_power fields. My understanding of the vendor driver is that these
should look like so:
/* RF path A */
u8 cck_tx_power_index_A[6];
u8 ht40_1s_tx_power_index_A[5];
struct rtl8723au_idx ht20_ofdm_tx_power_index_diff_A;
struct {
struct rtl8723au_idx ht40_ht20;
struct rtl8723au_idx ofdm_cck;
} tx_power_index_diff_A[3];
/* RF path B */
u8 cck_tx_power_index_B[6];
u8 ht40_1s_tx_power_index_B[5];
struct rtl8723au_idx ht20_ofdm_tx_power_index_diff_B;
struct {
struct rtl8723au_idx ht40_ht20;
struct rtl8723au_idx ofdm_cck;
} tx_power_index_diff_B[3];
/* RF path C */
[...]
/* RF path D */
[...]
... but RTL8188EU has only RF path A, so I stopped at that.
It's not pretty how these 4-bit signed values (nibbles?) are laid out,
so I hope that I'm just getting it wrong :-)
Cheers,
Jakub
>> +
>> struct rtl8xxxu_reg8val {
>> u16 reg;
>> u8 val;
>> @@ -587,6 +603,12 @@ struct rtl8723au_tx_power {
>> struct nibble_pair ht20_max_offset[3];
>> };
>>
>> +struct rtl8188eu_tx_power {
>> + u8 cck_index_A[6];
>> + u8 ht40_1s_index_A[5];
>> + struct nibble_pair ht20_ofdm_index_diff[1];
>> +};
>> +
>> struct rtl8xxxu_priv {
>> struct ieee80211_hw *hw;
>> struct usb_device *udev;
>> @@ -607,6 +629,7 @@ struct rtl8xxxu_priv {
>> char chip_name[8];
>> union {
>> struct rtl8723au_tx_power tx_power8723;
>> + struct rtl8188eu_tx_power tx_power8188;
>> } tx_power;
>> u32 chip_cut:4;
>> u32 rom_rev:4;
>> @@ -659,6 +682,7 @@ struct rtl8xxxu_priv {
>> u8 raw[EFUSE_MAP_LEN];
>> struct rtl8723au_efuse efuse8723;
>> struct rtl8192cu_efuse efuse8192;
>> + struct rtl8188eu_efuse efuse8188;
>> } efuse_wifi;
>> u32 adda_backup[RTL8XXXU_ADDA_REGS];
>> u32 mac_backup[RTL8XXXU_MAC_REGS];
>
> There is a lot of conflict with the last couple of patches - please
> rebase them against current.
>
> Thanks,
> Jes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
