iw mesh supports non-HT and HT channel widths like HT20 or NOHT. But the
Linux 802.11s implementation also supports VHT80 which can be specified
during the mesh join.
iw dev mesh0 mesh join "meshnet" freq 5180 80MHz
Signed-off-by: Sven Eckelmann <[email protected]>
---
v3:
* split patch into two different patches (0001/0002) as request by
Julian Calaby <[email protected]>
* change join_ocb to also use get_cf1
* move NOHT to the last entry in the mesh/ibss join usage texts as
requested by Julian Calaby <[email protected]>
v2:
* rebase from v4.3-ish version to current master
mesh.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/mesh.c b/mesh.c
index 593ab7a..d674d61 100644
--- a/mesh.c
+++ b/mesh.c
@@ -466,6 +466,10 @@ static int join_mesh(struct nl80211_state *state,
.width = NL80211_CHAN_WIDTH_20_NOHT,
.freq1_diff = 0,
.chantype = NL80211_CHAN_NO_HT },
+ { .name = "80MHz",
+ .width = NL80211_CHAN_WIDTH_80,
+ .freq1_diff = 0,
+ .chantype = -1 },
};
if (argc < 1)
@@ -604,7 +608,7 @@ static int join_mesh(struct nl80211_state *state,
nla_put_failure:
return -ENOBUFS;
}
-COMMAND(mesh, join, "<mesh ID> [[freq <freq in MHz> <HT20|HT40+|HT40-|NOHT>]"
+COMMAND(mesh, join, "<mesh ID> [[freq <freq in MHz>
<HT20|HT40+|HT40-|NOHT|80MHz>]"
" [basic-rates <rate in Mbps,rate2,...>]], [mcast-rate <rate in Mbps>]"
" [beacon-interval <time in TUs>] [dtim-period <value>]"
" [vendor_sync on|off] [<param>=<value>]*",
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
