From: Hante Meuleman <[email protected]> No need to pass timing configuration in local functions as they are static anyway.
Reviewed-by: Arend Van Spriel <[email protected]> Reviewed-by: Pieter-Paul Giesberts <[email protected]> Signed-off-by: Hante Meuleman <[email protected]> Signed-off-by: Arend van Spriel <[email protected]> --- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 31 +++++++++------------- .../broadcom/brcm80211/brcmfmac/cfg80211.h | 4 --- 2 files changed, 12 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 771c581..4aebb2a 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -91,6 +91,10 @@ #define BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS 400 #define BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS 20 +#define BRCMF_SCAN_CHANNEL_TIME 40 +#define BRCMF_SCAN_UNASSOC_TIME 40 +#define BRCMF_SCAN_PASSIVE_TIME 120 + #define BRCMF_ASSOC_PARAMS_FIXED_SIZE \ (sizeof(struct brcmf_assoc_params_le) - sizeof(u16)) @@ -5357,37 +5361,27 @@ roam_setup_done: } static s32 -brcmf_dongle_scantime(struct brcmf_if *ifp, s32 scan_assoc_time, - s32 scan_unassoc_time, s32 scan_passive_time) +brcmf_dongle_scantime(struct brcmf_if *ifp) { s32 err = 0; err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME, - scan_assoc_time); + BRCMF_SCAN_CHANNEL_TIME); if (err) { - if (err == -EOPNOTSUPP) - brcmf_dbg(INFO, "Scan assoc time is not supported\n"); - else - brcmf_err("Scan assoc time error (%d)\n", err); + brcmf_err("Scan assoc time error (%d)\n", err); goto dongle_scantime_out; } err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME, - scan_unassoc_time); + BRCMF_SCAN_UNASSOC_TIME); if (err) { - if (err == -EOPNOTSUPP) - brcmf_dbg(INFO, "Scan unassoc time is not supported\n"); - else - brcmf_err("Scan unassoc time error (%d)\n", err); + brcmf_err("Scan unassoc time error (%d)\n", err); goto dongle_scantime_out; } err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_PASSIVE_TIME, - scan_passive_time); + BRCMF_SCAN_PASSIVE_TIME); if (err) { - if (err == -EOPNOTSUPP) - brcmf_dbg(INFO, "Scan passive time is not supported\n"); - else - brcmf_err("Scan passive time error (%d)\n", err); + brcmf_err("Scan passive time error (%d)\n", err); goto dongle_scantime_out; } @@ -6089,8 +6083,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) /* make sure RF is ready for work */ brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); - brcmf_dongle_scantime(ifp, WL_SCAN_CHANNEL_TIME, - WL_SCAN_UNASSOC_TIME, WL_SCAN_PASSIVE_TIME); + brcmf_dongle_scantime(ifp); power_mode = cfg->pwr_save ? PM_FAST : PM_OFF; err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, power_mode); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h index d492163..cf7a93d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h @@ -29,10 +29,6 @@ #define WL_ROAM_TRIGGER_LEVEL -75 #define WL_ROAM_DELTA 20 -#define WL_SCAN_CHANNEL_TIME 40 -#define WL_SCAN_UNASSOC_TIME 40 -#define WL_SCAN_PASSIVE_TIME 120 - #define WL_ESCAN_BUF_SIZE (1024 * 64) #define WL_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
