Use SMPS disabled as default because FW does not indicate any support of SMPS.
This change will help STAs out that don’t support SMPS from sticking on 1SS, since they don’t have method to change it back to multiple chains. This change also should not affect power consumption of STAs supporting SMPS, because they are capable to switch the mode to dynamic or static either at the end of frame sequence or by using SMPS action frame. Signed-off-by: Peter Oh <[email protected]> --- drivers/net/wireless/ath/ath10k/mac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index b4bdeb0..6146a29 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3860,7 +3860,8 @@ static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar) ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; - ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT; + ht_cap.cap |= + WLAN_HT_CAP_SM_PS_DISABLED << IEEE80211_HT_CAP_SM_PS_SHIFT; if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI) ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
