On 11/30/2015 10:32 AM, Felix Fietkau wrote:
Coherent memory is more expensive to allocate (and constrained on some
architectures where it has to be pre-allocated). It is also completely
unnecessary, since the host has no reason to even access these allocated
memory spaces
Signed-off-by: Felix Fietkau <n...@openwrt.org>
- memset(ar->wmi.mem_chunks[idx].vaddr, 0, pool_size);
+ if (!num_units)
+ return -ENOMEM;
+
+ paddr = dma_map_single(ar->dev, vaddr, pool_size, DMA_TO_DEVICE);
+ if (dma_mapping_error(ar->dev, paddr)) {
+ kfree(vaddr);
+ return -ENOMEM;
+ }
Are you sure you have the direction correct for the 'dma_map_single'
call?
I thought this memory was for the NIC to scribble in, and probably
host should never even bother reading or writing it?
The reason I started looking at this is that I see these errors when
trying to use a 4x4 wave-2 ath10k NIC in a 4.4.0-rc7 ath kernel:
[ 202.489625] wlan0: authenticate with 00:0e:8e:f8:73:96
[ 202.784533] DMAR: DRHD: handling fault status reg 3
[ 202.786246] wlan0: send auth to 00:0e:8e:f8:73:96 (try 1/3)
[ 202.788133] DMAR: DMAR:[DMA Write] Request device [05:00.0] fault addr
ff5de000
DMAR:[fault reason 05] PTE Write access is not set
[ 202.887410] wlan0: send auth to 00:0e:8e:f8:73:96 (try 2/3)
[ 202.988423] wlan0: send auth to 00:0e:8e:f8:73:96 (try 3/3)
[ 203.089437] wlan0: authentication with 00:0e:8e:f8:73:96 timed out
This is on an Intel x86-64 system with IOMMU (VT-d) enabled.
I'm likely having more than one problem since a 4.3.0-rc6+ kernel is not
working with this NIC either...
Thanks,
Ben
--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
