From: Bruno Randolf <[email protected]> mac80211 documentation says, the ieee80211_ops.start callback "must turn on frame reception (for possibly enabled monitor interfaces.)". If not a single monitor interface does not receive data frames.
Similarly we should not change the data reception based on the association state. Signed-off-by: Bruno Randolf <[email protected]> Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 9f89f62..1b7ff74 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -4521,9 +4521,6 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, rtl8xxxu_update_rate_mask(priv, ramask, sgi); - /* Enable RX of data frames */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); - rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff); rtl8723a_stop_tx_beacon(priv); @@ -4538,8 +4535,6 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, val8 |= BEACON_DISABLE_TSF_UPDATE; rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); - /* Disable RX of data frames */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT; } h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT; @@ -5542,12 +5537,9 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw) } exit: /* - * Disable all data frames - */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); - /* - * Accept all mgmt frames + * Accept all data and mgmt frames */ + rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff); rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e); -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
