From: Jes Sorensen <[email protected]> Register 0x0944 is REG_RFE_BUFFER. Use the name rather than hard coded value when accessing it.
Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 690e31d..25a8ca5b 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -2946,9 +2946,9 @@ static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) val32 &= ~BIT(23); rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - val32 = rtl8xxxu_read32(priv, 0x0944); + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, 0x0944, val32); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); val32 = rtl8xxxu_read32(priv, 0x0930); val32 &= 0xffffff00; @@ -5912,9 +5912,9 @@ static void rtl8723bu_init_bt(struct rtl8xxxu_priv *priv) */ rtl8xxxu_write8(priv, 0x0974, 0xff); - val32 = rtl8xxxu_read32(priv, 0x0944); + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, 0x0944, val32); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
