From: Jes Sorensen <[email protected]> Another case where we should use the register name rather than the hard coded value when accessing it.
Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 25a8ca5b..18458db 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -2950,10 +2950,10 @@ static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) val32 |= (BIT(0) | BIT(1)); rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - val32 = rtl8xxxu_read32(priv, 0x0930); + val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); val32 &= 0xffffff00; val32 |= 0x77; - rtl8xxxu_write32(priv, 0x0930, val32); + rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
