Hello All,
We are trying use the calibrator for sending Tx packet for testing. Based on
the wiki http://processors.wiki.ti.com/index.php/WL127x_TX_Testing
we want to send MCS0 - MCS7 frames, when we tried using the following commands,
MCS0-MCS7 frmaes alone is not coming with preamble set to 6/7 are we missing
some configuration? can someone help me
calibrator wlan0 plt power_mode on
calibrator wlan0 plt tune_channel 0 1
calibrator wlan0 plt tx_cont 2000 0x2000 1500 0 17000 10000 3 1 0 6 3 1 1 1
08:00:12:34:56:7a calibrator wlan0 plt tx_stop calibrator wlan0 plt power_mode
off
thanks for the support
--
Dino Joseph Mycle
________________________________
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary
or legally privileged information. In case you are not the original intended
Recipient of the message, you must not, directly or indirectly, use, disclose,
distribute, print, or copy any part of this message and you are requested to
delete it and inform the sender. Any views expressed in this message are those
of the individual sender unless otherwise stated. Nothing contained in this
message shall be construed as an offer or acceptance of any offer by Sasken
Communication Technologies Limited ("Sasken") unless sent with that express
intent and with due authority of Sasken. Sasken has taken enough precautions to
prevent the spread of viruses. However the company accepts no liability for any
damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
