From: Jes Sorensen <[email protected]> This moves the loading of the AGC table into init_phy_bb() and reduces the if() clutter.
Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 26 +++++++++++------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 2127507..baa53a1 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -3756,6 +3756,11 @@ static void rtl8723au_init_phy_bb(struct rtl8xxxu_priv *priv) if (priv->rtl_chip == RTL8188C && priv->hi_pa && priv->vendor_umc && priv->chip_cut == 1) rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50); + + if (priv->hi_pa) + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table); + else + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table); } static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) @@ -3777,6 +3782,8 @@ static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); + + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); } static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv) @@ -3799,6 +3806,11 @@ static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv) val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; rtl8xxxu_write8(priv, REG_RF_CTRL, val8); rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table); + + if (priv->hi_pa) + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table); + else + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table); } /* @@ -3811,20 +3823,6 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) priv->fops->init_phy_bb(priv); - if (priv->rtl_chip == RTL8723B) - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); - else if (priv->rtl_chip == RTL8192E) { - if (priv->hi_pa) - rtl8xxxu_init_phy_regs(priv, - rtl8xxx_agc_8192eu_highpa_table); - else - rtl8xxxu_init_phy_regs(priv, - rtl8xxx_agc_8192eu_std_table); - } else if (priv->hi_pa) - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table); - else - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table); - if (priv->tx_paths == 1 && priv->rx_paths == 2) { /* * For 1T2R boards, patch the registers. -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
