From: Jes Sorensen <[email protected]> All the disable_rf() functions were setting REG_TXPAUSE to 0xff to stop transmission. Do it centrally before calling disable_rf() instead.
Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index a86b5c4..928ca56 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -2125,8 +2125,6 @@ static void rtl8723a_disable_rf(struct rtl8xxxu_priv *priv) u8 sps0; u32 val32; - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL); /* RF RX code for preamble power saving */ @@ -7665,8 +7663,6 @@ static void rtl8723b_disable_rf(struct rtl8xxxu_priv *priv) { u32 val32; - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA); val32 &= ~(BIT(22) | BIT(23)); rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); @@ -9591,6 +9587,8 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw) if (priv->usb_interrupts) usb_kill_anchored_urbs(&priv->int_anchor); + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + priv->fops->disable_rf(priv); /* -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
